Ⅳ Tune | Changhong Electric TM150F7E, TM201F7E instruction

button after two different channels are selected.

●Program

Display the current program’s channel number

●Name

Rename the program with four coloured buttons on the remote control 【Red】for Capitalized English letters

【Green】for Alphanumeric numbers from 0 to 9 【Yellow】for special characters as “#”

【Blue】Resuming “*” in unnamed mode Use【V+】/【V-】to input and select the characters

Note: In PC signal mode, there are 2 options of Language and Child Lock in the Setup menu. In AV/RGB/YPbPr signal mode, there are 3 options of Language, Blue Back and Child Lock.

ⅣTune

Press【P+】【/ P-】to select the Tune menu. There are altogether 7 items to adjust: Auto Search, Search, Band, Fine Tune, Colour System, Sound System and Skip.

●Auto Search

In Auto Search mode

1.The TV does auto-search and stores programs from VHF-L to UHF.

2.During search, all programs searched are automatically stored.

3.When the search is done or when all 100-program positions are occupied, or you have pressed 【MENU】during the search process, the search will halt and the TV will return to the Tune menu with channel 0.

●Search

In Search mode, press【V+】/【V-】so that the TV manually searches the lower or upper program position until one program was searched and automatic storage will commence. If the program is not needed, then press【V+】/【V-】again. After pressing 【MENU】, the TV will exit from Search and return to the menu.

●Band

To set which band the current program belongs to.

●Fine Tune

In Fine Tune mode, press【V+】【/ V-】to until the best picture and sound is achieved. After

adjusting, the TV will auto-store the channels. Press 【MENU】to exit and return to the Tune menu.

●Colour System

To set the colour system of the current program and use 【V+】/【V-】to switch between PAL, NTSC, SECAM and AUTO systems.

●Sound System

To switch between D/K,L B/G and I sound systems.

●Skip

Skipping the unwanted program can dramatically quicken program selection. PAGE 14