Peerless Industries PP730-S manual Using Vesa 75 or 100 mm Mounting Patterns, Or B, For Vesa

Using VESA 75 or 100 mm Mounting Patterns

WARNING

•If screws don’t get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.

Insert two M4 x 12 mm screws (A) into top two holes of

2 screen, leaving approximately .25" (6 mm) of exposed thread. Hook screws onto keyslots of adapter plate as indicated in figures 2.1 and 2.2.

*Note: If hole pattern is in a pocket, insert two M4 x 20 mm screws (B) with two retaining spacers (C) into top two holes of screen as indicated right.

Insert two M4 screws (A or B) through bottom holes of adapt- er plate as shown in figure 2.3.

*For screens with a hole pattern in a pocket, spacers (C) go between adapter plate

and screen. C

A 1/4”

FOR VESA® 75	FOR VESA 100	Screen may appear
		slightly different
MOUNTING PATTERN:	MOUNTING PATTERN:	than illustrated
fig. 2.1		fig. 2.2

adapter plate

A or B

adapter plate

fig. 2.3

5 of 20 ISSUED: 10-01-07 SHEET #: 095-9272-2 06-15-09