Peerless Industries HLG440-PH-Q10 instruction sheet Display Base No Screws Required

Page 4

Installation of Security Screws for Base to Display Attachment

5

32" Display Base (No Screws Required)

 

Attach display to base using hardware provided with display using the manufactures installation manual.

42" Display Base

Attach display to base using two M5 x 20 mm socket pin screws (G), two #10 split lock washers (H), and two #10 flat washers (I) into bottom holes as shown below. Tighten with 4 mm security allen wrench (F).

Use screws supplied with display for remaining holes.

42" Display Base Attachment Location (note orientation of screws)

H

G

DISPLAY

I

DISPLAY BASE

NOTE: Display and base may appear different than illustrated

4 of 4

ISSUED: 10-30-10 SHEET #:125-9164-2 09-14-11

© 2010, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.

Image 4
Contents Installation and Assembly Point Display Base Attachment Location Display Base Display Base No Screws RequiredDisplay Base Attachment Location note orientation of screws