Attaching Adapter Plate to Screen with VESA 200 x 100 or 200 x 200 | |
Mounting Pattern | |
| ADAPTER |
2 | Attach hook bracket to adapter plate using four |
M5 x 6mm screws (HH) and #10 washers as shown. | |
| BRACKET |
| #10 WASHER |
HH
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secured, damage may occur to screen or product may fail.
FOR VESA 200 x 100 MOUNTING PATTERN: | FOR VESA 200 x 200 MOUNTING PATTERN: |
plate to back of screen using four | plate to back of screen using four |
M4 x 10mm screws (AA) as shown below. | M6 x 12mm screws (CC) as shown below. |
*NOTE: If screw (AA) gets less than three threads of | *NOTE: If screw (CC) gets less than three threads of |
engagement, attach adapter plate to back of screen | engagement, attach adapter plate to back of screen |
using four M4 x 20mm screws (BB) and four spacers | using four M6 x 20mm screws (DD). If screw (DD) |
(FF) as indicated below. | still gets less than three threads of engagement, use |
| four M6 x 30mm screws (EE). |
AA
*For screens with a hole pattern in a pocket, spacers (FF) go between adapter plate and screen. FF
CC
2 of 3 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call |