9 | Roll can be adjusted 1° clockwise or |
counterclockwise. |
To adjust roll, loosen screen fasteners slightly, leaving them snug. Level screen, then tighten screen fasteners.
NOTE: When adjusting roll, screws should be retightened as indicated in step 4.
10 | Optional: To lock one sliding arm of mount in place, |
slide locking tab (B) over top or bottom of sliding arm |
and attach to mount using one M5 x 10 mm screw (AA) and one spacer (C).
Note: Screen not shown for clarity.
AA
B
C
SLIDINGARM
SCREENFASTENER
9 of 10 | ISSUED: |