FOR VESA 200 MOUNTING PATTERN:
Thread two M4 x 12 mm screws (BB), leaving .25" exposed thread, into top holes on back of screen. Hook screen onto mounting plate, and attach using two bottom M4 x 12 mm screws as shown in figures 4.3 and 4.4. Tighten all four screws.
FOR SCREENS WITH VESA MOUNTING PATTERN IN A POCKET:
Thread two retaining spacers (L) onto two M4 x 20 mm screws (CC), leaving .25" exposed thread as shown in figure
4.5.Thread M4 x 20 mm screws with retaining spacers into top holes on back of screen. Hook screen onto mounting plate, and attach using bottom two M4 x 20 mm screws and retaining spacers as shown in figures 4.3 and 4.4. Tighten all four screws.
MOUNTING PLATE |
| MOUNTING PLATE |
| |
| (NOTE: MOUNTING PLATE |
| ||
(NOTE: MOUNTING PLATE |
|
| ||
| SHOWN WITHOUT FULL |
| ||
SHOWN WITHOUT FULL |
|
| ||
fig. 4.3 | WALL MOUNT ASSEMBLY | fig. 4.4 | ||
WALL MOUNT ASSEMBLY | ||||
FOR CLARITY) | ||||
|
|
| ||
FOR CLARITY) |
|
|
|
fig. 4.5
For screens with a hole pattern in a pocket, spacers (L) go between mounting plate and screen.
Note: Flat panel screen may appear slightly different than illustrated.
For screen compatibility please refer to the plasma interface list on our website www.peerlessmounts.com or call customer care for a screen specific adapter bracket (PLP models).
FOR INSTALLING TO PEERLESS PLP MODEL ADAPTER BRACKET (not UL listed)
Note: Refer to PLP model adapter bracket instruction sheet for attachment of adapter bracket to screen.
5 | Thread two M10 x 15 mm screws (K), leaving .25" exposed thread, into top holes on back of screen. Hook screen |
onto mounting plate, and attach using two bottom M10 x 15 mm screws as shown in figures 5.7 and 5.8. Tighten |
screws using 6 mm allen wrench (not included).
| GENERICADAPTER |
| |
GENERIC | BRACKET |
| |
|
| ||
ADAPTER | MOUNTING PLATE |
| |
BRACKET |
| ||
|
| ||
| K |
| |
| K |
| |
MOUNTING PLATE |
|
| |
(NOTE: MOUNTING PLATE |
|
| |
SHOWN WITHOUT FULL |
|
| |
WALL MOUNT ASSEMBLY | fig. 5.7 | fig. 5.8 | |
FOR CLARITY) | |||
|
|
7 of 10 | ISSUED: |