Mitsubishi WD-52631 manual TV Remote Control and Ieee 1394 Devices

84Chapter 7. Using IEEE 1394 Devices

The TV Remote Control and IEEE 1394 Devices

•For satellite receivers and cable boxes, you may also be able to use the numbers or other additional buttons.

•For an IEEE 1394 cable box or satellite receiver, you can also try using the CABLE/SAT position of the TV remote control to see if it can operate the device. If not, use the remote control that came with the device.

To Power On or Off a Compatible IEEE 1394 Device

1.Press INPUT to open the Input Selection menu.

2.Move the highlight to the icon for the device. There is no need to press ENTER.

3.Press POWER.

4.Press EXIT to return to TV viewing.

Operation of IEEE 1394 Devices with the TV’s Remote Control

(slide switch set to TV position)

Device					AMPLIFIER
Remote Con-		CABLE/SAT	A/V DISC	DVCR	(some MPEG2
					models only)
trol Key
POWER		Power the device on/off when highlighted in the Input selection menu. See the instructions above.
CH	/	Channel up/down	Page up/down	Index search forward/re-
				verse
			(when track list is displayed)
				(if supported by DVCR)
VOL	/				Volume Up/Down
MUTE					Mute On/Off
0-9 (digits)		Number functions	Search by time
			(when followed by ENTER)
QV		Last Channel Recall
EXIT		Exit menus/displays	Exit menus/displays	Exit menus/displays
ENTER		Enter or select	Enter or select	Enter or select
CANCEL		Cancel function	Delete recording from Track List	Cancel function or counter
				reset
GUIDE		Digital-channel guide
		(may need to press	Display Track List.
		twice)
			Skip to beginning or end of
			program
		Up/down/left/right	Up/down in track list	Up/down/left/right
			Skip Backwards 12 seconds
			during playback
			Skip Forward 30 seconds
			during playback
	PLAY		Play	Play
	STOP		Stop	Stop
	RECORD		Record	Record
	REV		Reverse picture scan or Slow Play	Reverse or Slow Play
	FFWD		Fast picture scan or Fast Play	Fast Play
	PAUSE		Pause	Pause