Nextar MM1007 instruction manual Remote Sensor, Open the Monitor, Close the Monitor

ITEM# MM1007

•Video relative menu can be set only when monitor is opened.

•When clock (optional feature) is available, push select button long to display clock.

•Time setting sequence is as follow

a)Push SELECT long to display clock.

b)Push and hold ENTER to enter the time setting

c)Control joystick LEFT/RIGHT or rotate VOLUME to set hour.

d)Press ENTER key to complete setting hour

e)Control joystick LEFT/RIGHT or rotate VOLUME to set minute

f)Push ENTER key to complete setting minute

[12] REMOTE SENSOR

IR Remote control signal receiving window.

[13]OPEN (CLOSE) Button

OPEN THE MONITOR

When power is off, press open button and the unit is turned on and the monitor opens automatically. If movement of the monitor is hindered by an obstacle, it returns to its original position automatically.

CLOSE THE MONITOR

If there is an obstacle hindering the closing movement of the monitor when power is on and the monitor is opened, the monitor will stop its movement. Press again for closing after removing the obstacle. The monitor should be in the center position when closing, otherwise it will not be closed.

You can select the option of monitor auto closing or manual-closing by pressing MENU _ SYSTEM _ TILT and joystick to select either AUTO or MANUAL.. If AUTO is set and monitor is opened, the monitor is automatically closed when power is off. If MANUAL is set and the monitor is opened, the monitor will not close when power is shut off.

9