ITEM# MM1007
Video Setup
In the “Video setup” page users can set up the distributed video, TV node and video quality, as shown in the image below:
Component
“OFF” means system is now outputting compound video, YUV means YUV signal output and RGB means RGB signal output.
Quality (Video Quality Setup)
On this option page users can set up the “Sharpness”, “Brightness”, “Contrast”, “GAMMA correction”, “Hue”, “Saturation” and “Luma Delay” options.
Sharpness
Select “High”, “Medium” or “Low” screen sharpness. If users want to make the display softer, users should select “LOW”; and when the display is too dark the “High” option should be selected.
Brightness
Users can set up the screen brightness from the background brightness status.
Contrast
Users can set up the screen contrast from background brightness status. While adjusting the brightness or contrast, press the right key to enter into the setup mode; then, use up/down keys to make selections and left key to return back to the setup mode.
27