ITEM# MM1007

PCM Channel

Select “PCM channel” option in “SPDIF” menu page and select “SPDIF R/L”, “SPDIF LS/RS” or “SPDIF C/LFE” options. The “SPDIF R/L” means to select right or left stereo channel; the “SPDIF LS/RS” means to select right or left circulation channel; and the “SPDIF C/LFE” means to select the medium and heavy bass channel.

Dolby Digital Setup

Press “PLAY” at “Dolby code setup” option to enter into the menu; user can then set up the “R+L dynamic range compression”.

R+L

In the “R+L” selection users can select the “Stereo”, “R-sound”, “L-sound” or “Mix” option. In which “Stereo” means the output is a stereo signal; the “R- sound” means the output is right audio signal; the “Left-sound” means the output is left audio signal; and the “Mix” option means that system outputs the mean signal of the Left and Right channels added together..

Dynamic Range Compression

In the “Dolby code setup” option page, select the “Dynamic range compression” and press “PLAY” to make selections. Use up/down keys to select the compres- sion rate of the dynamic range. The higher compression range will make the difference between the treble and bass less distinct.

Channel Delay Setup

In the “Delay” setup menu page users can set up the relative signal delay to each of the speakers

Channel Trim

In the “Tone setup” menu page users can use up/down keys to move the curser and select the “Balancer setup” option. After pressing “PLAY” users can then enter the “Balancer setup” page to set up the “Balancer type”.