Nokia 9400 S owner manual TV Screen Format, Start/Stop Watching TV, Select Channel

Page 14

TV Screen Format

If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “4:3 (Pan & Scan)” or “4:3 (Letterbox)” to change display format. “4:3 (Pan & Scan)” will fill up the screen vertically, but cut off some information from the left and right sides of the picture. “4:3 (Letterbox)” will give a complete picture, but leave black areas at the top and bottom.

You can select the TV screen format in the “System setting” menu which is a subsidiary of the “User preference” menu.

Start/Stop Watching TV

To start the Mediamaster from stand-by mode, press the “” button or one of the numbered buttons on the remote control. It is also possible to start by pressing the button on the front of the Mediamaster. Put the Mediamaster into stand-by by pressing again the “” button again.

In stand-by mode the display will show the correct time. During viewing the channel number will also be displayed.

Select Channel

Change channel with the numbered buttons or with the up/down buttons on the remote control. You can also use the buttons up/down on the front panel of the Mediamaster.

You can also select TV (Radio) channel in the TV (Radio) channel list. See the “List of TV Channel” and “List of Radio Channel” of page 15 and 16.

Program Information. The “i” Button

Every time you change channel you will receive information for 4-5 seconds about the current programme. This information includes: Channel number, name, programme title, and time for present and following programmes. Press “i” while watching a channel. If your Service Provider transmits programme information you will see: Correct time, a small amount of information for the current and next programme, the name and

number of the channel, and finally the start and finish time for the programme.

If you want to get more detailed information, press “i” once more while the information box (banner) is shown. You will get extended information (if transmitted) about the current or next programme.

GB 14

Image 14
Contents Mediamaster Page Contents Mediamaster 9400SFor Your Safety Rear panelInstallation of the Mediamaster Front panelInstalling the satellite dish Connecting the Mediamaster to the satellite dishConnecting the Mediamaster to a TV set If you need to fit the F-connectors onto the cableConnecting to a TV and a Video recorder If Your VCR does not have a Scart connectorBefore you continue Connecting to Hi Fi systemPreparing the remote control Please read this information concerning menusRemote Control + PTuning your TV to the Mediamaster Basic SettingsTuning procedure when RF connections are used Please noteAntenna Satellite Configuration Language SettingsInstallation Welcome MenuAutomatic Channel Search Switch Type22KHz Tone Switch LNB TypeGeneral Information Manual Channel SearchViewing TV Select Channel TV Screen FormatStart/Stop Watching TV Program Information. The i ButtonRadio Button Volume LevelTV Guide List of TV ChannelsVideo Recorder Setting from the Main MenuList of Radio Channels Subtitling and Teletext. The Text ButtonEdit Channels TV Channels and Radio ChannelsTV Guide and Radio Guide Add Channels Rearrange ListRename List Lock ChannelsUser Preferences Rearrange ChannelsRemove Channels Parental ControlSystem Settings Game On/Off Timer SettingTime Setting Installation Submenus Advanced Channel SearchReinstall System InformationGlossary of Terms Problem Solving Problem Possible causes What to doTechnical Specification Transmission StandardsFirst Time Installation Menus Screen StructureNokia is a registered trademark of Nokia Corporation