Nokia 9400 S owner manual Technical Specification, Transmission Standards

TECHNICAL SPECIFICATION

Transmission Standards		TV SCART
DVB,MPEG2		RGB, CVBS, Audio
LNB/Tuner input		AUX SCART
Connector	2 x F-type	CVBS, Audio
(Loop Through)
Input frequency	950-2150MHz	Audio Output
Max Current	500mA max	Hi-Fi 2 RCA Jack
Supply Voltage	13V/18V
DiSEqC	1.0	Serial Data
RF Impedance	75 ohm	9pin D-sub RS232C signal
		Baud rates	15200baud max
Demodulator
QPSK		Remote Controller
Symbol rate	2-45 Msym/s	Type	RC4661
SCPC and MCPC		Operating distance	10 meters
		Batteries	2 x 1,5V AAA
Video decoder
MPEG-2 Main Profile @ Main Level		Rear Panel Interfaces
Data rates	up to 15Mbit/s	LNB IF IN/OUT
Video formats	4:3(letterbox),	RF modulator IN/OUT
	4:3(Pan & Scan)	2 x SCART for TV and AUX
	16:9	2 x RCA Audio (L/R)
		1 x RCA Video (CVBS)
Audio decoder		RS232C (9pin D-Sub)
MPEG-2 layer 1 & 2
Stereo, Mono, Dual channel, Joint stereo		General Data
		Operating Temperature	10 °C to 45°C
System resources		Storage temperature	-40°C to +70°C
Processor	108MHz MIPS 32bits	Supply Voltage	96-264V AC,
CPU RAM	2Mbytes		48Hz-60Hz
MPEG RAM	2Mbytes	Power Consumption Max	26W
Flash ROM	2Mbytes		at 500mA LNB Load
Resolution	720 x 576	Power Consumption in
OSD	16 colors	Standby	8W
		Dimension (W x D x H)	380x270x70 mm
RF Modulator		Weight	3.4 Kg
Output Channel	21-69
Output Signal	PAL B/G/I
Input/Output Connectors	IEC169-2 male/female
Preset Channel	43

GB 26