Automatic Channel Search, Manual Channel Search

You can enter a special LNB frequency, which is not presented in the LNB Type list as above.

22KHz Tone Switch:

If you have connected to a Dual LNB or two antennas connected to a 22KHz tone switch box, set it to “Enable” the 22KHz tone switch.

When you have finished the settings in this menu, press the “OK” button to save the parameter. Press BACK to continue with the channel search set-up

(You can also recall this menu later. From the Main Menu; select “Installation” and then “Antenna Satellite Configuration”).

Motorized System

Please refer to Page 12.

Automatic Channel Search

Highlight “Automatic Channel Search” using the down arrow button on the remote control. Mediamaster has pre- programmed Antenna/Satellite parameters for Astra, HotBird, Arabsat, NileSat, PanAmsat 4, AsiaSat2, AsiaSat3, TurkSat1B, TurkSat1C, Thor, Sirius and

Other1 to Other7.

Antenna Alternative: Select the option, “1 to 32”, that corresponds to your antenna system.

Predefined Channel: Each antenna alternative has one or two pre-programmed channel parameters. Choose a channel from which you want to start the channel search. Normally, each of the pre- programmed channels gives the same result.

Search Type: Select “Free Channels” in order to search for free channels only. Select “All Channels” in order to search all channels on the satellite.

Adjust Motor

Please refer to Page 12.

Manual Channel Search

You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the “Antenna alternative” menu, you can add new channels using the “manual channel search” function. When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet or from your Service Provider.

Antenna Alternative: Select Antenna Alternative “1 to 32” that

GB 15