Start/Stop Watching TV, Select Channel, TV Guide

Start/Stop Watching TV

To start the Mediamaster from stand-by mode, press the “” button or one of the numbered buttons on the remote control. It is also possible to start by pressing the button on the front of the Mediamaster. Put the Mediamaster into stand-by by pressing again the “” button again.

In stand-by mode the display will show the correct time. During viewing the channel number will also be displayed.

Select Channel

Change channel with the numbered buttons or with the up/down buttons on the remote control. You can also use the buttons up/down on the front panel of the Mediamaster.

You can also select TV (Radio) channel in the TV (Radio) channel list. See the “List of TV Channel” and “List of Radio Channel” of page 16 and 17.

Program Information. The “i” Button

Every time you change channel you will receive information for 4-5 seconds about the current programme. This information includes: Channel number, name, programme title, and time for present and following programmes. Press “i” while watching a channel. If your Service Provider transmits programme information you will see: Correct time, a small

amount of information for the current and next programme, the name and number of the channel, and finally the start and finish time for the programme.

If you want to get more detailed information, press “i” once more while the information box (banner) is shown. You will get extended information (if transmitted) about the current or next programme.

TV Guide

By pressing the GUIDE button you obtain access to the

TV Guide which gives the titles of the current programmes on the different channels. By pressing the LEFT or RIGHT button you also can also obtain information about the next programme. The minimized viewing window also helps you to select channels and information. Use the Up/Down buttons to move the cursor to different programme areas. You can obtain extended information for a programme by pressing the “i” button.

The Radio Button

GB 17