Harman-Kardon DVD 27, Progressive-Scan DVD Player owner manual VCD Playback

Page 32

VCD PLAYBACK

VCD Playback

VCD, a video playback format that predates DVD, it is based on a different compression format than DVD and uses a recording method that is similar to CD. Although the DVD has, for the most part, replaced VCD as a for- mat, the DVD 27 offers VCD playback so that you may play your existing library of VCD discs.

There are two versions of the VCD format: an early version which is simply called “VCD” and a later version with Playback Control which is called “Version 2.0” or “PBC.” The DVD 27 is compatible with both forms of VCD, although playback will vary according to which version is used and the specific way in which the disc was created.

Even though VCD discs provide video, because the format is based on CD technology, the playback functions for a VCD disc are similar to CD. To play a VCD disc, place it in the DVD 27 as you would do with any other CD or DVD disc. The unit takes a few seconds to read the disc’s contents; the VCD Disc Type Indicator A in the front-panel display will light and the disc will begin playing. However, keep in mind that the exact level of functionality for any VCD will vary widely and it is ultimately determined by the way the disc was created, not by the DVD 27, particularly if the disc has been created under VCD Version 2.0 with Playback Control (see “Playback Control”).

When playing VCD discs, most standard DVD/CD play- back controls are used, including Play, Stop, Pause, Resume, Track Skip Forward and Reverse, Slow Forward, Step Forward and Fast Forward. The Reverse Search and Step Reverse functions are not available with VCDs.

With VCDs, you have access to information on the disc playing by pressing the Info Button 8on the remote.

The availability of the Repeat and Random functions will depend on whether PBC Support has been activat- ed using the System Setup Submenu (see page 18). With PBC Support on, Repeat and Random will not be available. Repeat A-B is always available. Simply press the Repeat A-B Button 6once at the beginning of the passage to be repeated, again at the end of the passage, and a third time to cancel Repeat A-B mode.

Discs containing raw MPEG files, without playback control, are played in a different manner. When such a disc is loaded, the Player Information menu will appear, with a list of folders or files, similar to an MP3 disc. The disc directory is navigated using the ▲▼ Navigation Buttons D. Press the Enter Button s to open or close a folder. Select the desired track, and press the Play Button v or the Enter Button s to begin play. You will find that the Stop, Pause, Track Skip Forward and Reverse, Slow Forward and Reverse, Step Forward and Reverse, and Fast

Forward and Reverse Search functions are all avail- able, depending on how the disc was encoded. However, the Status Banner is not available for these types of VCDs.

Using the Status Bar for VCD Playback

When playing VCD discs, it is possible to access the disc’s features using the Status Bar. Press the Status Button Qto see the Status Bar. Note, however, that when PBC is on, some features may not be available with that VCD.

The Status Banner will appear the same as for DVDs (see Figure 13), except that the current and total num- ber of tracks will be shown, rather than titles, and there is no chapter display.

If PBC is off, you may select the track number and change it to skip to another track. You may also begin play from a specific time marker by selecting the numeric time display and entering the desired starting point using the Numeric Keys R. You may also change the time display from Track Elapsed, to Track Remaining, to Disc Elapsed, to Disc Remaining, and back to Track Elapsed, just as with DVDs. The elapsed time will appear as a graphic temperature bar, with additional lines added as more of the track or disc is played.

Zoom Function

The Zoom function is available for VCDs by pressing the Zoom Button u. Repeatedly pressing this but- ton will cycle through the possible settings of 1x, 2x and 3x zoom.

Playback Control

VCD discs made under the Revision 2.0 specification will usually offer PBC playback control.

The PBC Indicator F in the front display will turn on automatically with any VCD when the disc is played.

With PBC, you can select titles and navigate the disc as with DVDs. However, the access to some functions may be prohibited by PBC playback control; in that case, the prohibit icon will appear on screen.

When the VCD is made without PBC, the disc can be controlled the same as an audio CD, but direct track access by entering a number is not possible without opening the On-Screen Banner Display.

With PBC, many discs include chapter selection menus that are similar to those found on DVDs. However, on VCD discs, the disc menu (if any) is accessed and controlled differently than on DVDs.

Play 2Lwill start with the first track (which may be an intro), then leading to the VCD menu (if any) automatically.

Next (Skip Forward) 6Owill skip to the VCD menu from the intro (Track 1) directly.

Once the menu options appear on the screen, make your selection by pressing the Numeric Keys H that correspond to your desired choice. The desired selection will begin playing automatically.

Direct number entry without any VCD menu shown on-screen has no effect – even when the Status Banner is on.

The Disc Menu Button Pused during DVD play- back is not used for VCD playback.

Use of functions when PBC is on will vary according to the disc type. Note that if the disc was created with Playback Control (PBC) it is not possible to change track numbers directly.

32 VCD PLAYBACK

Image 32
Contents Power for the Digital Revolution PROGRESSIVE-SCAN DVD PlayerTable of Contents DVD 27 DVD PlayerIntroduction IntroductionSafety Information Safety InformationFeatures & DVD Compatibility Features & DVD CompatibilityPacking List DVDDVD Terminology DVD TerminologyFull Brightness FRONT-PANEL ControlsFRONT-PANEL Controls FRONT-PANEL Information Display ± Lights when the disc is pausedFRONT-PANEL Information Display Remote Control Functions Remote Control FunctionsRNumeric Keys Press these buttons to enter a number UPower Off Turns off the player to Standby mode REAR-PANEL Connections REAR-PANEL Connections£ Optical Digital Audio Output ¶ S-Video OutputSetup and Connections Connecting to a TV OnlySetup and Connections Video NotesConnecting to a Receiver Remote Control Operation Battery InstallationRemote Control Operation Range Service Life of BatteriesDigital Audio Connection For Your ReferenceDolby Digital and DTS Digital Audio ConnectionSystem Setup System SetupSystem Setup On the Setup Main Menu, the Available Submenus AreSelect from any of the choices shown in the drop- down menu Level 5 Intermediate level between the R and PG-13 ratingsAudio Setup Submenu Following adjustments are available on the Audio Setup menuVideo Setup Submenu Video Adjustments BannerFollowing adjustments are available on the Video Setup menu To limit the sampling rate to 48kHz‹ Navigation Button n to decrease the setting Test Screen Test ScreenTest Screen Playback Features for DVD and CD Discs Playback BasicsLoading Discs Playback BasicsDuring slow modes. Slow-play is not available for CD discs Using a DVD’s Menu Zoom FeaturePlayback Resume Feature DVD PlaybackDisc This line displays the disc type, such as DVD-Video Disc This line displays the disc typeVideo Off Feature Repeat PlayCD Playback CD PlaybackTime This section consists of three lines @ will change accordinglyRandom Indicator C in the Front-Panel Random PlayMP3, Windows Media and Jpeg Playback 30 MP3, Windows Media and Jpeg PlaybackMP3, Windows Media and Jpeg Playback Jpeg PlaybackVCD Playback VCD PlaybackVCD Playback Programmed Play Programmed PlaySymptom Possible Cause Solution Troubleshooting GuideTroubleshooting Guide Ntsc DVD 27 Technical SpecificationsTechnical Specifications