Remote Control Functions

BDISC MENU: Displays the actual DVD Disc Menu on the TV screen in play mode. When playing discs with JPEG images, pressing this button will access the thumbnails.

CPAUSE: Freezes a picture (with DVD/VCD) and pauses the playback signal (CD) when a disc is playing. Press again for normal playback.

DSTATUS: Press while a disc is playing to view banner display. Use the ARROW buttons to move through the different features in the Banner Display.

ESKIP/STEP (Previous): Press to go to

beginning of current track. Press again quickly to go to beginning of previous track. After pressing the PAUSE button, each press of this button will move the image in reverse frame by frame.

FSKIP/STEP (Next): Press to go to begin- ning of next track. After pressing the PAUSE button, each press of this button will move the image forwards frame by frame.

GPLAY: Begins to play disc (closes disc tray first, if it is open.)

HSEARCH/SLOW (REV): Allows you to search in reverse through a disc while it is in play mode. Each time you press this button, the search speed changes as indicated by a number of arrows on the right top of your screen.

After pressing the PAUSE button, each press of this button will change the slow down speed indicated by a number of arrows in the right top of the screen.

ISTOP: Stops playing a disc. When a disc is playing, if you press STOP and PLAY, the disc will resume play, i.e. it will start from the same point on the disc where the unit was stopped. If you press STOP twice and the PLAY button, the disc will start play from the beginning.

JSEARCH/SLOW (FWD): Allows you to search forward through a disc while it is in play mode. Each time you press this button, the search speed changes as indicated by a number of arrows on the right top of your screen.

After pressing the PAUSE button, each press of this button will change the slow down speed as indicated by a number of arrows in the right top of the screen.

KDIMMER: Press to change the brightness of the front panel display or to turn the display off completely in the following order: FULL BRIGHTNESS  HALF BRIGHTNESS  OFF  FULL BRIGHTNESS

LBACK: Press this button while viewing the DMC 1000’s Setup menus or Status Display to exit a drop down menu without making a selection. It has no effect on a disc’s menus.

MZOOM: When a DVD or VCD is playing, press this button to zoom the picture so that it is enlarged. There are 4 steps to the zoom function, each progressively larger. Press through each of the zoom stages to return to a normal picture.

NMenu: Press to display the main menu for media playback and control.

OFind: When browsing content from the Media Library, press to search for any audio track stored on the system’s hard-disc drive.

When the Find Track box opens, use the Numeric Keys to enter the name of the desired track (see Numeric Keys description). When a DVD is play- ing, press this button to display a dialog box that allows you to directly select a group, title, track or chapter as appropriate to the disc. With the correct cell in the dialog box highlighted, use the Numeric Keys to enter the section of the disc from which you would like playback to begin (it is not necessary to press the Enter Button). The disc will automatically jump to that section. You may also use the function to begin playback from a specific time point in the track, chapter or file, or on the disc (DVDs and CDs), sometimes called Time Search. With the Time cell highlighted, use the Numeric Keys to enter up to six digits that indicate the time from which you would like playback to start. If you enter fewer than six digits, press the Enter Button to complete the entry, and the disc will immediately jump to that point.

PA-B:Press to select section A-B and to play repeatedly.

QV.OFF: Press to turn off video output for improved performance from audio-only discs. Press again to restore video output.

LIGHT: Press to illuminate remote controller.

NUMERIC KEYS: Select numbers by pressing these buttons. While managing the Media Library, these buttons may also be used to enter letters and punctuation when naming playlists or content. A character-entry dialog box will appear to guide you, as shown in Figure 35 on page 28. You may use the M / N /K/L Navigation Buttons to highlight the desired character key and press the Enter Button repeat- edly until the desired character is displayed in the text bar at the top of the character-entry dia- log box. You may find it easier to press the corre- sponding Numeric Key to directly select charac- ters. Each press of a Numeric Key cycles through the upper- and lowercase letters or symbols shown on the remote and on screen.

Use the alphabetic keys to jump to desired areas of the Media Library content. Example: While displaying the Media Library organized by artist, press any letter key to jump to the first artist whose name begins with that letter.

Play Mode: Press this button while a disc is playing to display the Play Mode dialog box, which allows you to program Random or Repeat playback and play lists.

CLEAR: Press to remove the Banner menu from the screen.

IR EMITTER: This small, clear button-like device sends the IR commands from the remote control to the DMC 1000. To ensure proper performance of the remote control, be sure to point it toward the unit and do not cover it with your fingers when sending remote commands.

Video Mode: Press to cycle through the available video output settings. If you inadver- tently change the video setting in the on-screen menu system and the picture is lost or scram- bled, press this button to return to a setting compatible with your video display.

Record: Press this button to open a menu that allows you to record content from one media source to another.

•Audio CDs are automatically recorded to the Media Library when they are inserted.

•Audio sources connected to the Auxiliary Analog Audio Inputs may only be recorded to the Media Library. You may later transfer that content from a playlist to a memory card, a recordable CD or a USB drive.

•To copy recordings from the Media Library to a memory card, a USB drive or a CD-R/RW disc, first create a playlist of the desired content. If the content was originally imported to

the Media Library from a memory card or USB device, the DMC 1000 automatically created a playlist at that time.

•When using the pull-down menus to select a recording source (“From”) and a destination (“To”) only those sources with available con- tent will appear. The Auxiliary Analog Audio Inputs will always appear, because the DMC 1000 is not capable of detecting the presence of an audio signal.

ENGLISH

REMOTE CONTROL FUNCTIONS 13