Harman-Kardon DMC 1000 owner manual DTS Rear Panel Connections

Page 14

Rear Panel Connections

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc.

1996-2007 DTS, Inc. All Rights Reserved.

Optical Digital Output

Remote Control Output

Network Jack

Coaxial Digital Output

Remote Control Input

USB Port

AC Power Cord

Zone 2/3/4 Analog Audio Outputs

RS-232 Port

Composite Video Output

HDMI Output

Master Power Switch

S-Video Output

Zone 1 Analog Audio Outputs

Fan Vent

Component Video Outputs

Analog Audio Input

 

Scart TV Output

The Bridge Connection

 

Optical Digital Output: Connect this jack to the optical digital input of an A/V receiver or surround processor for Dolby Digital, DTS or PCM audio playback.

Coaxial Digital Output: Connect this jack to the coaxial digital input of an A/V receiver or surround processor for Dolby Digital, DTS or PCM audio playback.

NOTE: The coaxial digital output should only be connected to a digital input. Even though it is the same RCA-type connector as standard analog audio connections, DO NOT connect it to a conventional analog input jack.

Connect either the Optical Digital Audio Output or the Coaxial Digital Audio Output to a corresponding digital audio input on your receiver or processor, but not both.

AC Power Cord: Connect this plug to an AC outlet. If the outlet is controlled by a switch, make certain that it is in the ON position.

Composite Video Output: Connect this jack to the video input on a television or video projector, or to a video input on an A/V receiver or processor if you are using that type of device for video input switching.

S-Video Output: Connect this jack to the S-Video input on a television or video projector, or to an S-Video input on an A/V receiver or processor if you are using that type of device for S-Video input switching.

Component Video Outputs: These out- puts carry the component video signals for connection to display monitors with component video inputs. For standard analog TV's or projectors with inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these outputs to the correspon- ding inputs. If you have a high-definition televi- sion or projector that is compatible with high scan rate progressive video, connect these jacks to the “HD Component” inputs. Note that if you are using a progressive scan display device, then ”Progressive” must be selected in the Video Set-up Menu in order to take advantage of the progressive scan circuitry. See page 22 for more information on progressive scan video.

IMPORTANT: These jacks should NOT be connected to standard composite video inputs.

SCART OUT (TV): If your TV has a SCART socket, you can connect a SCART cable to your TV and to your DMC 1000 Player for improved video quality. The SCART cable carries both audio and video. You can select Composite Video or RGB video for that SCART connector’s video output signal.

Remote Control Output: Connect this jack to the infrared (IR) input jack of another compatible Harman Kardon remote controlled product to have the built-in Remote Sensor on the DMC 1000 provide IR signals to other com- patible products.

Remote Control Input: Connect the output of a remote infrared sensor, or the remote control output of another compatible Harman Kardon product, to this jack. This will enable the remote control to operate even when the front panel Remote Sensor on the

DMC 1000 is blocked. This jack may also be used with compatible IR remote control-based automation systems.

Zone 2/3/4 Analog Audio Outputs: When the DMC 1000 is being used for multi- zone operation, connect these jacks to the sepa- rate Zone inputs on your multiroom controller or hub, or the amplifiers feeding the multizone sys- tem.

HDMI Output: If you have an HDMI-com- patible receiver or video display device, connect this output to an HDMI input on the receiver or video display for the highest-quality uncom- pressed digital audio and video available. Even if your receiver is not capable of processing audio in the HDMI format, you may still experience the superb reproduction of HDMI video.

If your video display has a DVI input, you may use an optional HDMI-to-DVI cable or adapter for the connection to the display. In all cases, the video display must be HDCP-compliant in order to use the HDMI output. For best results, we do not recommend HDMI connections in excess of 3 meters..

The following audio formats may be output via the HDMI connection:

Audio CD – 2-Channel PCM or 5.1-channel DTS

DVD-Video – Up to 5.1-channel Dolby Digital or

DTS

14REAR PANEL CONNECTIONS

Page 13 Page 15
Image 14
Page 13 Page 15
Contents DMC 1000 Digital Media Center Table of Contents Backlit, Ergonomically Designed Remote Control IntroductionTerminology TerminologyTerminology High quality video FeaturesMany convenient features High quality digital audioDMC 1000 will not play the following Upgradeability via Internet Packing ListMemory Card Compatibility Card SlotPlay/Pause Navigation Buttons Stop Front Panel Door Full-Power Mode bright blue The DMC 1000 operates normallyFront Panel Controls Open/Close Press this button to open or close the Disc TrayFront Panel Controls Source/Disc Type Indicators Lights when a disc is playing in the normal modeLights when the disc is paused Audio Bitstream IndicatorsParental Lock Indicator This indicator B Repeat Info Press for detailed informations on the disc playingSKIP/STEP Previous Press to go to Remote Control FunctionsLight Press to illuminate remote controller BPress to select section A-B and to play repeatedlyRear Panel Connections DTS Rear Panel ConnectionsFor iPod models with a dock connector RS-232 Port Connect the DMC 1000 toSetup and Connections Connecting to a TV Only OptionalService life of batteries Remote ControlBattery installation Remote control operation rangeCD’s can be played as they would normally be played For your referenceDolby Digital and DTS Basic Play Disc Playback FeaturesPlayback Basics Display the Setup Menu System SetupMedia Library Setup Turn On the DMCDVD Player Setup Menu contains the following settings DVD Player SetupDMC 1000’s Setup menu screens follow the same basic format Audio Setup Video SetupGeneral Setup Advanced SetupDMC Basics Repeat Play Using the On-Screen Status DisplayVideo Off Feature Chapters and TitlesPlaylists Displays all playlists you have pro- grammed OperationAudio Playback From the Media Library View All Tracks Expands the current album into a track viewPlay Queue and Playlists Cover Art SortData Media Play QueueAppear UsingProgramming a Playlist Only three options are available for iPod con- tentAudio CDs Content TransferAuxiliary Analog Audio Inputs Data CDsSolid-State Media Media LibraryDMC 1000 will display the playlists in the Media Library Select content for playback in that zone as usual Multizone OperationSymptom Possible Cause Solution Troubleshooting GuideTroubleShooting Guide Only USB flash drives that do not function as stand alone Technical Specifications Appendix Keep your backup of the Media Library Table A6 Advanced Setup MenuTable A7 Power Modes Restores the Media Library from UpdatedEula This AgreementAny particular case, based on the explanations below Gracenote Eula Gracenote and Muze Terms of UseGNU Lesser General Public License, Version 2.1, February Eula Eula No Warranty Body of this LicenseHarman Kardon, Incorporated Partnumber 25A08G-0DMC0-Q00
Related manuals
Manual 48 pages 17.04 Kb
Top Page Image Contents