Harman-Kardon DMC 1000 manual Multizone Operation, Zones Menu

Page 33

OPERATION

Multizone Operation

The DMC 1000 is capable of streaming audio to up to four independent zones simultaneously, allowing users in different areas of the home to enjoy unique programs. The zones may easily be linked or unlinked to each other, to play the same program in more than one zone. Manage the zones by displaying the Main Menu and selecting the Zones command. The screen shown in Figure 46 will appear.

Figure 46 – Zones Menu

Zone 1 is the current zone, as indicated by the checkmark in the box to its left. Each zone is assigned a different color box, indicating none of the zones are linked to other zones.

To rename a zone, highlight the button containing its name and press the Enter Button. Select one of the default names, such as Den or Dining Room, or create a new name. The DMC 1000’s character-entry dialog box will appear to guide you. (See Figure 35.)

To link zones together, highlight the line for what will be the “master” zone. If other zones are linked to the master zone, content playing in the master zone is streamed to any zones linked to it. Select the Zone Links option, and then select one or more of the other three zones to link to the master zone.

To unlink zones, highlight the master zone and select the Zone Links option.

Click on a linked zone to select it for unlinking.

To begin playback in any zone, navigate to its line, make sure the colored box to the left of the zone name is highlighted and press the Enter Button. A checkmark will appear in the box. Press the Menu Button to display the Main Menu, and the current zone, along with any other zones linked to it, will be identified in the upper right corner of the video display. Select content for playback in that zone as usual.

When you return to the Zones menu, the cover art for the current selection, or a generic icon when no cover art was found, appears to the left of the line for each active zone.

Interrupt playback to any zone by navigating to it and selecting the Pause Playback option. The DMC 1000 will remember its location in the current selection when the Play Button is pressed to resume playback. When the Stop Playback option is selected, the DMC 1000 will not remember the location, and when the Play Button is pressed, playback will start from the beginning of the selection.

33

Image 33
Contents DMC Important Safety Instructions Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Introduction Thank you for choosing Harman KardonDMC 1000 Digital Media Center Data and Control Ports FeaturesOptical Disc Player Recording destinations Media Library from any sourceMedia Compatibility Disc Formats Supported by This PlayerMPEG-2 digital video XD-Picture Card may be used in Card Slot Remote Front-Panel Door Card FRONT-PANEL ControlsFRONT-PANEL Controls Message Display Message Display Master Power Switch REAR-PANEL ConnectionsConnection For iPod models with a dock connector Remote Control Functions Open/Close Press to open or close the disc drawer Disc Menu Press to view a DVD’s menuPlay Press to begin playback Light Press to activate the remote’s backlighting system Step One Placement InstallationStep Four Connect Media Sources See FigureStep Six Connect the Remote IR Input and Output Step Eight Plug In AC PowerStep Nine Insert Batteries in Remote Step Seven Network ConnectionStep Two Display the Setup Menu Initial SetupStep Three Media Library Setup Step One Turn On the DMCPreferred Subtitle Language When available on the disc, Step Four DVD Player SetupStep Five Audio Setup Step Six Video SetupLow frequencies Step Eight Advanced Setup Step Seven General SetupOperation Using the DMCTurning On the DMC Playing DVDs and CDsChapters and Titles Status DisplayRepeat Play Camera Angles Audio Playback From the Media LibraryAudio Soundtracks Is displayed SubtitlesMedia Library Playlists Displays all playlists you have programmedPlay Queue and Playlists Data MediaCover Art Sort Play QueueAuxiliary Analog Audio Inputs Using TheBridgeTMTo transfer the CD’s content to the Media Library Content TransferData CDs Auxiliary InputsSolid-State Media Media LibraryZones Menu Multizone OperationTroubleshooting Guide Incorrect OSD language Password not acceptedLanguage Picture is displayed Copying to VCRGlossary Glossary Appendix Appendix Default settings and worksheetsTable A7 Power Modes Table A8 DVD Language Codes END-USER License Agreement Eula EulaGracenote Eula Gracenote and Muze Terms of Use Eula No Warranty Page Page Memory Cards DMC1000 Technical Specifications
Related manuals
Manual 42 pages 20.22 Kb