Harman-Kardon AVR 500 manual Technical Specifications

Page 40

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

80 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

70 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

70 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:

70 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47 kohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz– 100kHz

High Instantaneous

 

Current Capability (HCC)

±45 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.3/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 65dB

Image Rejection

80dB

IF Rejection

90dB

Tuner Output Level

1kHz, ±75kHz Dev 500mV

AM Tuner Section

 

Frequency Range

520 –1710kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Video Section

 

Video Format

NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency

10Hz–8MHz (–3dB)

Response

 

General

 

Power Requirement

AC 120V/60Hz

Power Consumption

78W idle, 694W maximum

 

(2 channels driven)

Dimensions (Max)

 

Width

17.3 inches (440mm)

Height

6.5 inches (165mm)

Depth

17.1 inches (435mm)

Weight

34 lb (15.4 kg)

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark, of Harman International Industries, Inc.

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” “AC-3” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround are trademarks of Digital Theater Systems, Inc.

††UltraStereo is a trademark of UltraStereo Corp.

VMAx is a trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc.

39TECHNICAL SPECIFICATIONS

Image 40
Contents Page AVR 500 Audio/Video Receiver AVR 500 Audio/Video Receiver Introduction Description and FeaturesWhile complex digital systems are hard Important Safety Information Safety InformationUnpacking Preset Stations Selector * Tuner Mode Volume Control ÷ Delay Digital Input Selector ù Set ButtonFront Panel Controls Information Display Remote SensorCh Direct inputs ¤ as the listening source Night Mode Indicator This indicator Analog Source Indictor This indicatorFront Panel Information Display Rear Panel Connections £ AMRear Panel Connections Forward/Reverse Transport Buttons z Night Mode ` Multi-Room Remote Control FunctionsAVR Selector OSD Button Press this button to view the on-screen displays Remote Control Functions Installation and Connections System InstallationAudio Equipment Connections Connect the analog output of a CD player to the CD inputsSystem and Power Connections Speaker Selection and Placement System ConfigurationSpeaker Placement System Setup Plug the Power Cable ¡ into an unswitched AC outletUsing the On-Screen Display Speaker ConfigurationOutput Level Adjustment CEN SpeakerDelay Settings Press the Set button i To set the delay times, follow these stepsVor in the on-screen display Press the Set button i Operation Basic OperationDisplay Brightness Semi-OSDVolume Control Source SelectionSurround-Mode Selection Main Information Display V will now read VFD FullSurround Mode Chart Night Mode Digital Audio PlaybackSelecting a Digital Source Dolby DigitalPreset Tuning Recalling Preset StationsTuner Operation PCM Audio PlaybackOutput-Level Trim Adjustment Memory BackupTape Recording Channel Direct InputMultiroom Setup InstallationMultiroom Operation Multiroom OperationProgramming the Remote Programming the RemoteProgrammed Device Functions Volume Punch-ThroughMacro Programming Press the Volume Up button Reassigning Device-Control SelectorsFunction List Setup Code Tables TV Manufacturer/Brand008 024 030 065 101 143 160 038 070 083059 143 154019 047 169004 058 101 127 133 143 160Setup Code Tables VCR Manufacturer/Brand Setup Code Number054 133 140020 031 063 034 067 Setup Code Tables CD Setup Code Tables DVDSetup Code Tables DVD/LD Setup Code Tables CableSetup Code Tables SAT Manufacturer/Brand Setup Code Number Remote Control ModelTroubleshooting Guide Processor ResetAmplifier is in protection mode Display brightness is turned offTechnical Specifications