42 6-Channel/8-Channel Direct Input Press

REMOTE CONTROL FUNCTIONS

31Disc Skip Button: This button has no direct function for the AVR but is most often used to change to the next disc in a CD or DVD changer when the RCP 2 is programmed for that type of device. (See page 10 for more information on using the remote with other products.)

32 Preset Down/Status Button: When the tuner is in use, press this button to scroll through the stations programmed into the AVR’s memory. When the remote is used to control the DVD, this button has the same function as the Status button on the DVD player. Press it while playing a DVD, VCD, SVCD, MP3, WMA or JPEG selection to display the Status Bar.

33 Preset Up/Playlist Button: When the tuner is in use, press this button to scroll up through the stations programmed into the AVR’s memory. When the remote is used to control the DVD, this button has the same function as the Playlist button described in the DVD owner’s manual. Press it to select playback in the order the tracks appear on the disc, or to play a pro- grammed playlist of tracks instead.

34Clear Button: Press this button to clear incorrect entries when using the remote to directly enter a radio station’s frequency. When the remote is used to control the DVD, this button has the same function as the Clear Button as described in the DVD owner’s manual. Press it to remove an on-screen menu.

35 Memory/Audio Button: Press this button to enter a radio station into the AVR’s preset memory. First, tune to the desired station, and then press this button. Two underline indicators will flash at the right side of the Upper Display Line ˜, and within five seconds press the Numeric Keys rfor the preset number between 01 and 30 that you wish to assign to the station. When the remote is used to control the DVD, this button has the same function as the Audio Button as described in the DVD owner’s manual. Press it

to change the audio language or format type on the disc being played.

36 Delay/Previous Channel Button: Press this button to begin the process for setting the delay times used by the AVR when processing surround sound. After pressing this button, the delay times are entered by pressing the Set Button pand then using the ⁄/¤ Buttons nto change the setting. Press the Set Button pagain to complete the process. When the remote is used to control a TV, VCR, cable box or satellite receiver, this button functions as the Previous Channel or “Flashback” button when properly programmed.

37Speaker Select/Disc Menu Button: Press this button to begin the process of configuring the AVR’s bass-management system for use with the type of speakers used in your system. Once the but- ton has been pressed, use the ⁄/¤ Buttons n to select the channel you wish to set up. Press the Set Button p again, and use the ⁄/¤ Buttons n to select the speaker size, as described in the AVR owner’s manual. Press the Set Button p to select another channel to configure. When all adjust- ments have been completed, press the Set Button ptwice to exit the settings and return to normal operation. When the remote is used to control the DVD, this button has the same function as the DVD’s Disc Menu Button. Press it to view the menu on a DVD disc.

38Multiroom/Subtitle Button: When the remote is used to control the DVD player, this button has the same function as the Subtitle Button as described in the DVD owner’s manual. Press it to turn the subtitles on or off, or to select from the various subtitle lan- guages that the disc may offer. When used with the AVR 335, as part of the CP 35 system only, this but- ton activates the Multiroom system.

39Volume Up/Down: Press these buttons to raise or lower the system volume.

40 SPL Selector: This button activates the AVR’s EzSet function to quickly and accurately calibrate the AVR’s output levels. Press and hold the button for three seconds and then release it. Press the “7” Numeric Key rto indicate that you are using a 6.1/7.1-channel speaker system with the AVR. If you install only five speakers, with no rear surround chan- nel, press the “5” Numeric Key r. The test tone will begin circulating, and the Program/SPL Indicator cwill change colors. During this sequence, EzSet will automatically adjust the output levels for all chan- nels until they are equal, as shown by the Program/ SPL Indicator clighting green for each channel. Press this button again when the adjustment is com- plete to turn off the test tone. See page 2 for more information. If you have a CP 35 system, we recom- mend that you use the EzSet+ function described in the AVR 335 manual, as it provides additional benefits over EzSet.

41 Learn Button: Press this button to begin the process of “learning” the codes from another product’s remote into the AVR’s remote. (See page 7 for more information on using the remote’s learning function.)

42 6-Channel/8-Channel Direct Input: Press

this button to select the device connected to the AVR’s 6/8-Channel Direct Inputs.

43 Mute: Press this button to momentarily silence the AVR or TV set being controlled, depending on which device has been selected. When the RCP 2 is being programmed to operate another device, this button is pressed with the Input Selector Button e to begin the programming process. (See page 7 for more information on programming the remote.)

44 EzSet Sensor Microphone: The sensor micro- phone for the EzSet microphone is behind these slots. When using the remote to calibrate speaker output levels using EzSet, be sure that you do not hold the remote in a way that covers these slots.

6 REMOTE CONTROL FUNCTIONS