Memorizing the Channels
Your PDP TV can memorize and store all of the available channels for both antenna and cable channels. After the available channels are memorized, use CH/to scan through the available stations.
Selecting the Signal Source
Before your PDP TV can memorize the available channels, you must specify the type of signal source that is connected
1
2
3
4
If the search menu does not display, press VOL+/-
5
6
If you are connected to an antenna, please select antenna (the selected item displays in green). If you connect cable, please select cable.
options |
tv tuner |
content blocking |
select to activate tuner menu |
search |
|
|
|
source | antenna | cable | |
autoset | <select> to enable | ||
auto fine tune |
| off | on |
fine tune |
|
| 50 |
channel skip |
| off | on |
right/left to change source |
|
|
Storing Channels in Memory Automatically
1 Repeat steps 1~4 in [Selecting the Signal Source] to
2
search |
|
|
|
source | antenna | cable | |
autoset | <select> to enable |
| |
auto fine tune |
| off | on |
fine tune |
|
| 50 |
channel skip |
| off | on |
select to activate autoset |
|
|
3
The unit will begin memorizing all of the available
Note:
The process of auto memory will be stopped if you press the MENU button.
channel searching please wait or press menu to cancel
12
19