Primate Systems PDP TV manual Troubleshooting, Symptoms Check item

Troubleshooting

Before calling for repair service, check the following items for possible remedies to an

Symptoms	Check item
“Ghost” or double images	￿This may be caused by obstruction to the antenna due to high
	rise buildings or hills. Using a highly directional antenna may
No power	￿Check that the AC power cord is plugged into the mains
	socket.
	￿Unplug the power cord, wait for 60 seconds. Then re-insert
No picture	￿Check antenna connections at the rear of the unit to see if it
	is properly connected to the unit.
	￿Possible broadcast station trouble. Try another channel.
	￿Adjust the contrast and brightness settings.
	￿Check the Closed Captions control. Some TEXT modes could
	block the screen.
	￿Select a correct input.
	￿Is a non-compatible signal being input?
Good picture but no sound	￿Increase the VOLUME.
	￿Check that the unit is not muted.
	￿Check Whether the sound is output to headphone
Good sound but poor color	• Adjust the contrast, color and brightness
Poor picture	￿Sometimes, poor picture quality occurs when having
	activated an S-VHS camera or camcorder connected and
	having connected another peripheral at the same time. In this
	case, switch off one of the other peripherals.
Horizontal dotted line	￿This may be caused by electrical interference (e.g. hairdryer,
	nearby neon lights, etc.)
	￿Turn off the equipment.

Television not responding to remote control

￿Check whether the batteries are working. Replace if necessary.

￿Clean the remote control sensor lens on the unit.

￿Do not use the remote control under strong or fluorescent

Snowy picture and noise	￿Check the antenna connection.
No stable or not	￿Check if you have selected the correct VGA mode in your
synchronized VGA picture
No output from one
of the speakers

Note:

If your problem is not solved, restart your TV by turning it off and then on again once.

41