C6
DSetting up the DVR to Playback
Click on the MD AREA SETUP button, to display the image shown in (C6). This option allows you to select the area you want to be sensitive to motion. The area in red is sensitive to motion. You can set this area by using the USB mouse, or pushing the REV, FWD, and SEL keys on the DVR front panel. Once you have set the area, right click with the mouse or push the ESC key to save the setting. After you have set the motion sensitivity area for all cameras, click on the Apply button to save the settings.
D2
EBackup Files
E1
File List:
On the Video Search Menu mode, click FILE LIST to display the
Select a file from the list. Push the SELECT button to playback the file.
For more information on the File List option, refer to section 5.2.4 “Search Recordings” in the User’s Manual.
From the Main Menu select SEARCH to display the Video Search Menu (D1).
Searched Playback:
D1If you input a specific date and click SEARCH, you will find all the recordings for that day. When you select the day and time to view, you will see all 4 cameras play back. (The highlighted dates are the files available to play.)
You can also click the FILE LIST button to display the File list interface, and playback or backup the file you selected (D2).
When playing back video:
E2
Insert a USB flash drive or USB hard drive into the USB port on the back of the DVR, bottom USB port. Display the File List menu by clicking FILE LIST from the Video Search Menu. (See section D).
To backup one recorded event from the file list, select the file from the list, and click BACKUP. To backup more than one file, put a check mark in the BAK box at the end of each file you choose to backup. A Progress Bar will display. When the backup is complete, a dialog box will appear as “Backup Success!” Click the [OK] button to save your backup (E2).
1.Fast Forward at speeds of 2x, 4x, or 8x
2.Play video at Normal pace, or Slow Play at 1/2x, 1/4x, 1/8x
3.Pause and Play frame by frame using the Playback Control Bar
4.Adjust volume by clicking or sliding the Tune Control Bar.
When playback has finished, the previous menu will be displayed.
Explanation: The Backup file will be in H.264 format. H.264 video can only be viewed with the Multimedia Player which comes with your DVR, or through the NetViewer program. In order to have your backup video compatible with all Media Players, you must convert the video into AVI format using the Multimedia Player or NetViewer program. See section 5.2.5 in the product manual for more information on using the Multimedia Player.
Page 7 | Page 8 |