Time Schedule Recording, Grid Explanation

Time Schedule Recording:

From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (C2). Select the channels (cameras) that you wish to record on a schedule. The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the unselected channels will be “Gray”. Click on the green GENERAL option box, and then select the boxes for the days and times to record using this option on the timeline. You can use the [From – To] pull-down menus and COPY button to copy settings from one day to another day, or all days. Your DVR will record on it’s Time Schedule and separate files will be created with the Pack Time Intervals you selected.

Select APPLY to activate your customized schedule, and then reboot the DVR.

You can also click on the DEFAULT button to use the system defaults. The system default settings are:

Hr 01:00 am-07:59 am : No recording

Hr 08:00 am-18:59 pm : General recording (Time Schedule)

Hr 19:00 pm- 00:59 am : Alarm recording (Motion Detection)

Grid Explanation:

Red= Alarm (motion detection) recording

Green= General (time schedule)recording

Transparent= No recording

Blue= The channel and date selected.

Motion Detection Recording:

From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (C2). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the unselected channels will be Grey. Click on the red ALARM option box, and then click on the boxes for the days and times that you want to record using this option on the timeline. You can use the [From – To] pull-down menus and COPY button to copy settings from one day to another day, or all days. Your DVR will record on Motion Detection, and separate files will be created with the Pack Time Intervals you selected.

Select APPLY to activate your customized schedule, and go to the Devices option (C3), and then select the Motion Option (C4) which will display the Motion Detect Box.

C3C4

	C5	The Motion detection Menu (C5) has
	C5	three sections, including Channel
		three sections, including Channel
		Status, Sensitivity and Motion area.
		CHANNEL STATUS: This option allows
		you to enable motion detection on
		any channel.
		SENSITIVITY: This option allows you
		to set the sensitivity level of motion
		detection from 1 to 4.
		(Level 4 being the highest.)

Page 5

Page 6