Q-See QSNDVR9M and QSNDVR16M user manual

Page 12

Attention:

19 pins are in the other row). Make sure pins are plugged into interface correctly. Connect the power supply to HDD

Sketch map of installation

Close the device cover and lock it with screws

Please format the HDD before using.

If the user wants to connect the CD/DVD driver to the ATA interface, please choose

the secondary interface, that is near the center of the motherboard. Furthermore, the CD/DVD driver must be set as master, and the HDD which is connected to same ATA interface

with the CD-RW/DVD-RW must be set as slave.

Any CD/DVD drive connected to DVR must be set as master, including USB CD/DVD drive and IDE CD/DVD drive.

The CD/DVD drive connected to ATA interface can be viewed in the STATUS or STORAGE menu of DVR, the CD/DVD drive connected to USB interface can not be viewed in the menu of DVR.

The CD/DVD driver is optional, depending on the user. If user connects CD/DVD driver to ATA interface, the max number of HDD that connects to ATA interface is three.

Page 11

Image 12

Contents User’s manual for MPEG4 DVR Model QSNDVR9M and QSNDVR16M Table of Contents Monitoring from Computer on Same Router Features of this DVR General Product introductionBackup FormatStorage Record and playbackAlarm PTZ controlCommunication port NetworkChecking the contents Installing the Hard DriveInstall tool Install processPage Jumper according to the diagram above Operation Page Sketch of installation Back panel and interface terminals Back panel of 16-channel DVRVideo input LAN port Audio Alarm input1-16 Alarm output Fan vent Back panel of 9-channel DVR Back panel of 9-channel DVRDescription Power button Front panel and interface terminalsPage HDD Remote control description Backup Move Up Move LeftMove Right Move DownAudio switch Pan/Tilt controlFig2.1.1 PIP Fig2.1.2 POP Alarm cable connection How to start the DVR Basic operation guideLive Login and setup the system Menu structure chartPage SETUP-SYSTEM Page Current Status View Page Page Page Page Page Better the picture Page Page Page Fig3 .2 .18 Set up se n so r de te ctio n Page Fig3.2.21 setup schedule record time ENTER→ YES MENU→ no Delete ALL Delete ALL Stop Recording and TRYPage Type Monitoring From a Computer on Same Router Monitoring From a Remote Computer Page Page Sensor Type Page Page Page SETUP-AUDIO Function StatusAudio Backup & View Backup Page Backup Hour MINCancel View backupBrief introduction of buttons Main menu of the Backup viewer Check Water Mark CheckSnap Again SavePrint 4 PAN/TILT ZOOM/FOCUSSequence LOG List Event Explain Search record Time Search Date chooseTime choose Event Search First File Search Spot Page Appendix a Main Standard & Parameter chart AppendixAudio Searching & Playback Electrical Appendix B Record capability Appendix C The meaning of some abbreviations