Port 1 is used for logon;
Port 2 is used for controlling the DVR;
Port 3 is used for live surveillance;
Port 4 is used for backup;
Port 5 is used for playing back.
NET CLIENT ID: The default ID is “NetUser”, the user can set other four IDs and passwords for viewing through the network. (Fig 3.2.31 Net client ID).The
NET DVR ID: The identification of the DVR. You can edit it at will, it can be composed of numbers, letters, and symbols.
NET CLIENT ADDR (address) (Fig 3.2.32 Net client address): Fill in these options with the network information needed. Use the “Up” “Down” “Left” “Right” buttons and ENTER key to fill the blank. “<000.000.000.000>” means that any IP address can access the DVR through network. The user can set up ten IP addresses as restricted IPs to access the DVR.
Page 55