Mantel Clearances, Floor Clearances | Desa CCL3018NA, CCL3018PTA

INSTALLATION

Mantel Clearances Floor Clearances

INSTALLATION

Continued

MANTEL CLEARANCES

Mantel Shelf

In addition to meeting noncombustible material clearances, you must also meet required clearances between fireplace opening and mantel shelf. If you do not meet the clearances in Figure 7, you will need a hood.

Determining Minimum Mantel Clearance

If you meet minimum clearance between mantel shelf and top of fireplace opening, a hood is not required (see Figure 7).

Determining Minimum Mantel Clearance When Using a Hood

If minimum clearances in Figure 7 are not met, you must have a hood. When using a hood there are still certain minimum mantel clearances required. Follow minimum clearances shown in Figure 8 when using hood.

	12"
	10"
	8"
	6"
	2 1/2"
Minimum Non-
Combustible
Material	8"	12"	15"
	8"	12"	15"
	Min.
	Hood	Distances to
	(GA6050, GA6052,	Distances to
	(GA6050, GA6052,	Underside of
	and GA6053)	Underside of
	and GA6053)	Mantel
		Mantel

18"

Underside of

Mantel Shelf

All minimum distances are in inches

Log Set

20" All Models

Top of Fireplace Opening

NOTICE: Surface temperatures of adjacent walls and mantels become hot during operation. Walls and mantels above the firebox may become hot to the touch. If installed properly, these temperatures meet the requirement of the national product standard. Follow all minimum clearances shown in this manual.

NOTICE: If your installation does not meet the mini- mum clearances shown, you must do one of the following:

Figure 8 - Minimum Mantel Clearances When Using Hood

FLOOR CLEARANCES

A.If installing appliance on the floor level, you must maintain the minimum distance of 14" to combustibles (see Figure 9).

B.If combustible materials are less than 14" to the fireplace, you must install appliance at least 5" above the combustible floor- ing (see Figure 10).

•operate the logs only with the flue damper open

•raise the mantel to an acceptable height

•remove the mantel

14"