Desa CCL3924NTA, CCL3018PTA, CCL3930NTB, CCL3924NA Installing Middle Log #2 CCL3930PTB/NTB Shown

INSTALLATION

Installing Logs (Cont.)

15

INSTALLATION

Continued

2.Place the base of the middle log (#2) in the U-shaped slots of the grate base. The cutout on the right of the middle log should fit over the burner (see Figure 25). Make sure the front of the middle log is resting on the tabs of the grate base.

3.Locate pins on the bottom of back log (#3). Slide these pins into the holes in the grate base behind the burner (see Figure 26).

4.Locate holes on the bottom of crossover log (#4). Slide front hole onto the left pin (CCL3924PTA/NTA or CCL3930PTB/ NTB) or middle pin (CCL3018PA/NA or CCL3018PTA/NTA) on the middle log (#2) and the pin on the back log (#3). See Figure 27 for placement.

5.For CCL3924PTA/NTA and CCL3930PTB/NTB Only: Locate pin and hole on the bottom of crossover log (#5). Slide the pin into the hole located in crossover log (#4). Slide the hole onto the pin on front log (#1). See Figure 28.

For CCL3018PA/NA and CCL3018PTA/NTA Only: Locate holes on the bottom of crossover log (#5). Slide the holes over the left pins on middle log (#2) and front log (#1). See Figure 29.

Middle Log (#2)

Burner

Tab U-Shaped Slot

Figure 25 - Installing Middle Log #2 (CCL3930PTB/NTB Shown)

Pins

Rear Log (#3)

Pins Crossover Log (#4)

Middle Log

(#2)Back

Log (#3)

Figure 27 - Installing Crossover Log #4 (CCL3930PTB/NTB Shown)

Crossover Log (#5)

Crossover Log (#4)

Front Log (#1)

Figure 28 - Installing Crossover Log #5 (CCL3930PTB/NTB Shown)

Crossover	Crossover
	Log (#4)
Log (#5)	Crossover
	Log (#6)
Middle Log (#2)

Hole in Grate

Base

Burner Front Log (#1)

Figure 29 - Installing Crossover Log #5 and Log #6

(CCL3018PA/NA and CCL3018PTA/NTA Only)

Figure 26 - Installing Rear Log #3 (CCL3930PTB/NTB Shown)

For morevisit www..com

111160-01B