Q-See QSNDVR9M and QSNDVR16M user manual Delete ALL Stop Recording and TRY

Page 48

LOCK/UNLOCK: Lock/unlock the record. Use enter key to change the status (Fig 3.2.24 Lock/Unlock file). If the file is locked, then the record can not be deleted or overwritten even though the HDD is full.

DELETE ALL:

If the DVR is recording, the system will Post:

“DELETE ALL

STOP RECORDING AND TRY”

Once the recording is stopped, the system will send reminder that: (Fig 3.2.25 Delete all the file)

“ALL RECORDED FILES WILL BE DELETED

ARE YOU SURE?

[ENTER]YES [MENU]NO”

Press ENTER key to delete all the records or press MENU key to cancel this operation.

3.2.4SETUP-STORAGE(Fig 3.2.26 Setup storage)

OVER WRITE: If you choose YES, the DVR will have continuous recording and over write from the oldest file when HDD is full. The DVR overwrites file from the oldest file. If you choose NO, the DVR will stop recording when the HDD is full.

FORMAT: Use the “Up” and “Down” keys to choose HDD that you want to format. A warning pops up after pressing “ENTER”.

“DISK HDD-*

MOUNTED

ARE YOU SURE?

Page 50

Image 48
Contents User’s manual for MPEG4 DVR Model QSNDVR9M and QSNDVR16M Table of Contents Monitoring from Computer on Same Router Features of this DVR General Product introductionBackup FormatStorage Record and playbackAlarm PTZ controlCommunication port NetworkChecking the contents Installing the Hard DriveInstall tool Install processPage Jumper according to the diagram above Operation Page Sketch of installation Back panel and interface terminals Back panel of 16-channel DVRVideo input LAN port Audio Alarm input1-16 Alarm output Fan vent Back panel of 9-channel DVR Back panel of 9-channel DVRDescription Power button Front panel and interface terminalsPage HDD Remote control description Backup Move Up Move LeftMove Right Move DownAudio switch Pan/Tilt controlFig2.1.1 PIP Fig2.1.2 POP Alarm cable connection How to start the DVR Basic operation guideLive Login and setup the system Menu structure chartPage SETUP-SYSTEM Page Current Status View Page Page Page Page Page Better the picture Page Page Page Fig3 .2 .18 Set up se n so r de te ctio n Page Fig3.2.21 setup schedule record time ENTER→ YES MENU→ no Delete ALL Delete ALL Stop Recording and TRYPage Type Monitoring From a Computer on Same Router Monitoring From a Remote Computer Page Page Sensor Type Page Page Page SETUP-AUDIO Function StatusAudio Backup & View Backup Page Backup Hour MINCancel View backupBrief introduction of buttons Main menu of the Backup viewer Check Water Mark CheckSnap Again SavePrint 4 PAN/TILT ZOOM/FOCUSSequence LOG List Event Explain Search record Time Search Date chooseTime choose Event Search First File Search Spot Page Appendix a Main Standard & Parameter chart AppendixAudio Searching & Playback Electrical Appendix B Record capability Appendix C The meaning of some abbreviations