Q-See QSD42908 Loading the batteries into the IR controller, Starting the Remote Control

Page 12

QSD42908 User’s Manual

	15	Reserved

	16	F1	Same as【F1】key of front panel.

	17	Lens control	IRIS, FOCUS ZOOM for lens
	17	Lens control	control.
			control.
	18	F2	Same as【F2】key of front panel.

Loading the batteries into the IR controller

1.Remove the battery cover.

2.Insert the battery. Make sure that the poles (+ and -) are correctly positioned.

3.Replace the battery cover.

Starting the Remote Control

Press【DEV】key, input the DVR device ID (default is “88”, can be changed in

“Display” menu) and then press the【ENTER】key. If the “STATUS” light of the DVR front panel is green, it means you can use the remote control to operate the DVR.

Disabling the Remote Control

When the remote control status is on, press【DEV】key again, the “STATUS” light will turn off. Then the remote control can not control the DVR.

Powering Down the DVR

When the remote control status is on, press【POWER】key for several seconds, the DVR will be powered off.

If Remote Control Does Not Work

•Check pole positions of batteries.

•Check the remaining charge in the batteries.

•Check to see if the sensor is blocked.

•If the problem still exists, please contact Administrator.

12

Image 12

Contents QSD42908 Net DVR User’s Manual V2.1 Index Chapter Chapter Website Customer Service Features Product IntroductionSummary Network function OthersInstallation Checking the DVR and Its AccessoriesInstallation notice Installation instrumentRear Panel Description QSD42908 Rear panelOperational Instructions Front PanelIndex Type Name Description Ready IR Remote Control Index Name DescriptionStarting the Remote Control Disabling the Remote ControlPowering Down the DVR If Remote Control Does Not WorkMenu Description How to enter into menu mode Main Menu DescriptionQSD42908 User’s Manual How to exit menu Input text Power on Basic Operation GuidePreview Recording status Form 4-1 Camera record status Icon Icon Color Status DescriptionAlarm status User name and password LoginChange Password QSD42908 User’s Manual PTZ Pan/Tilt/Zoom Control PTZ Control InterfaceAdjust Preset Description Start/Stop Auto in PTZ Control ModeSelect Channel PTZ Control Keys DescriptionExit PTZ Control Mode Manual RecordDescription Playback Playback InterfaceDescription Playback With Mouse Attached Control Bar Functions Backup Recorded Files Backup Daily Recorded FilesSelect backup device Shutting down the DVR normally Using menu Using【POWER】key of front panel or IR remote controlParameters Setup Guide Administrator and PasswordPassword modification User management Add and Delete User Add userEnter into User Management menu shown in fig Setup the password for new user Setup the rights for new userAdd new user name Save the new user’s password and rights User rights description LocalRemote through network or internet MAC addressDelete user Unit Name and Device ID Unit nameDevice ID Video Output Standard and VGA Setup Camera name and OSD On Screen Display SetupVGA setup Video output standardCamera Name Position System TimeDate OSD Position Video Parameters Setup Mask Area Setup Disable the mask check box means cancel the mask area View Tampering Alarm Enter into Camera menuVideo Loss Alarm QSD42908 User’s Manual Motion Detection Interface shown as figClear motion area QSD42908 User’s Manual Preview Properties Recording Setup Preview propertiesRecording menu description Bit Rate TypeAll day recording setup Enter into recording schedule menu Select a day and enable all day recording optionRecord type Select one day and disable all day recording option Setup time period and record typeCopy to other days SaveExternal Alarm Input and Relay Output External alarm input setupAlarm type Enter into Alarm in Handling sub menuAlarm trigger record channel setup Schedule for alarm handle methodAlarm handle method Save setupPTZ Linkage Alarm relay output setup Select delay timeEnter into alarm out schedule Setup alarm out scheduleExceptions Network Parameters Network menu descriptionAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ Pan, Tilt, Zoom PTZ menu descriptionPreset setup Sequence setup Cruise setup 18 RS232 setup RS232 menu descriptionSetup at DVR end Example PPP Modem passive dialup through PstnSetup should pay special attention to QSD42908 User’s Manual Establish the dialup connection Restore Parameters UtilitiesUpgrade Stop Alarm Out RebootPower Off Hard Disk ManagementView Log By TypeFor example The steps of viewing alarm log By TimeBy Type&Date System Information Firmware Upgrade FTP Server SetupSetup username Upgrade Mode QSD42908 User’s Manual QSD42908 User’s Manual QSD42908 User’s Manual Step Step Appendix a Mouse Control Function Test input interface Scroll wheel forwardPlaylist interface User interfaceAppendix B HDD Capacity Calculation = d i ¸ 8 ´ 3600 ¸1024How to Make a RS-485 Connect Cable Appendix C DVR Connect Cable DefinitionMaterial and tool RJ45 introduction Pin definitionHow to Make a RS-232 Connect Cable How to Make a UTP network Connect CableCorresponding relationship of cross cable Appendix D Specifications PAL 15FPS, Ntsc 20FPSAppendix E Troubleshooting Failure Possible reasonsAppendix F Product Service & Warranty Appendix G Customer Information Card 100