Press 
to configure the DVR play/record system.
Press | to print the picture of DVR's playback |
Press | to play the video . |
Chapter 3: Installation - 3.2 Connecting Cameras and TV Monitor
There are 4 camera inputs and 1 video output with BNC connectors (Refer to Chapter 2: Layout
1.Connect the camera cables from the camera to the 4 Video Inputs on the DVR.
2.Connect the 4 power feeds for the cameras to the power connectors on the cable near the video ports of the DVR, connect the other end to the power supply and plug the power supply into a surge protector.
3.Using the included RCA to BNC cable, connect the yellow RCA connector from the cable to the RCA video in port on the TV, connect the silver BNC connector on the other end of the cable to the BNC video out port on the back of the DVR.
NOTE: Refer to Chapter 10:
Chapter 3: Installation - 3.3 Connecting Power Supply
Please only use the power adapter supplied with the DVR.
Connect the power cord to a surge protector or Uninterruptible Power
Supply.
Chapter 4: System Boot -4.1 Detecting Installed Hard Drive
After connecting the power, the system will
On the Monitor it will show the hard drive information.
Please refer to the hard drive manual to configure hard drive as Master.
Page 21 | Page 6 |