Q-See H264 user manual QT536

QT536

FRONT PANEL

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 16

ITEM NAME FUNCTION

1POWER (Behind flip-downPuts the DVR into standby mode or wakes it up from

	panel)	standby mode.
2	USB PORT	Used for external USB backup devices.
	(Behind flip-down	panel)
3	NUMBER PAD	Enter channel numbers.
4	MENU	Opens the Main Menu
5	BACKUP	Opens Backup Menu
6	DIRECTION	Navigates through selections in menus
7	RECORD	Begins manually recording on all channels
8	SEARCH	Enters Search Mode

9INDICATOR LIGHTS Shows status of the DVR Functions and the Hard Drive

10	VIEWING MODE	Change between 1, 4, 8 and 16-screen viewing mode
11	10+ BUTTON	Input channels numbers above 10 by pushing this
		button followed by the second digit.
12	PTZ	Enter PTZ mode in live view
13	AUDIO	Turn audio on or off in live view if audio input devices
		are attached.
14	INFO	Displays system information
15	ENTER	Confirms selection in menus or input in fields
16	PLAYBACK CONTROLS	REW - Rewind
		PLAY - Opens the Playback interface. Pauses or
		resumes playback
		FF - Fast Forward
		STOP - Quits Playback mode
		Also switches video output mode.
17	CONTROL KNOB	Outer ring navigates through menus
		Inner knob increases or decreases speed of fast
		forward or rewind.

BACK PANEL

1 2 3

	4		5	6	7	8	9	10	11		12	13	14	15	16	17	18	19
ITEM		NAME								FUNCTION
1		VIDEO OUT								BNC connector for TV or monitor
2		VIDEO IN								BNC connectors for up to 16 cameras
3		LOOP OUT (2)								Output each channel to a separate monitor. Each port
										handles 8 channels.
4		SPOT OUT								Connect to another monitor as an auxiliary output
										channel. This monitor will only display video and will
										have no menu access.
5		AUDIO IN								16 channels of audio input
6		AUDIO OUT								Audio output for amplified speaker
7		MICROPHONE IN								Connect a microphone for two-way audio
8		VGA PORT								VGA output for 19” or larger monitor
9		HDMI								HDMI video output
10		USB PORT								For the USB mouse
11		LAN								Network (ethernet) port
12		eSATA (2)								Connection for external eSATA hard drive for backup
13		ALARM IN								Connect up to 16 external sensors
14		ALARM OUT								4 Channel relay output for external alarms
15		PTZ								Connections for Pan-Tilt-Zoom speed dome cameras.
										Y = “+” Z = “-”
16		K/B								Connector for a PTZ keyboard
17		POWER SOCKET								Attachment point for power cord
18		POWER SWITCH								Use to turn on the DVR as well as to turn off after
										powering down from within the GUI
19		FAN								Cooling fan exhaust port. This should not be blocked.

34 35