Q-See H264 user manual Preset, Name Symbol What it Does, Cruise, Track

Preset

Clicking a Setting button in the Preset column will bring up another window

PRESET - Channel 1

No. Enable	Name	Preset
1	preset001	Setting
2	preset002	Setting

3	preset003	Setting
4	preset004	Setting
5	preset005	Setting
6	preset006	Setting
7	preset007	Setting
8	preset008	Setting
9	preset009	Setting
10	preset010	Setting
		OK	Exit

PICTURE 7-4

Name	Symbol What it Does
Add	Opens a window to allow the user to set the speed and time of a new
	preset point
Delete	Deletes a preset point
Modify	Opens the settings window for the selected preset point allowing you
	to change the settings

Arrows	Enables the user to alter the position of a setting in the cruise order.
	Move a preset point all the way to the top of the order
	Move a preset point up one position in the list

And, selecting Setting will bring up the	01	02	03	04	05	06	07	08	All
								No.	1
camera view along with a control panel to		Zoom
		Focus
program the camera’s motion.									Save
		Iris

Speed: 5

PICTURE 7-5

The dome’s rotation can be controlled vertically, horizontally and diagonally along with its speed. The lens zoom, focus and iris (light level) can be set as well. Select the number you want to assign to this set of actions and click the Save button to save your preset. You can hide the control panel by clicking on the “-” button or right-clicking on the screen. The control panel can be unhidden by right-clicking on the screen again. The X button will exit the control interface.

Cruise

Selecting a Setting button from the Cruise column will open the Cruise window.

Select Add or double-click on an existing line to modify and the CRUISE PRESET window will open.

Delete will remove a selected cruise line Clear All will remove all of the cruise lines.

PICTURE 7-6

The set of icons to the right of the screen are used to configure each cruise setting.

Preview – Preview the cruise to ensure that you have the desired results.

PICTURE 7-7

Move a preset point down one position in the list

Move a preset point to the bottom of the order

Track

This interface is used to program the tracking routine for the camera. Clicking on the Track button will bring up the live view for that camera plus a control panel:

PICTURE 7-8

The user can control the dome’s rotation direction, plus speed as well as the zoom, focus and iris.

Start Record – The system will begin recording the sequence of movements you perform on the PTZ control panel. Clicking this again will stop the recording.

Start Track – This will play back the tracking sequence you just recorded. Clicking on this button again will stop the playback.

74 75