QSD004 User’s Manual
5.6 Record Quality
There are three levels of recording quality: High, Normal, and Low. Higher quality uses more hard drive space.
Record frame rate, record quality and available hard drive space will all affect the total recording time of the DVR system.
5.7 Schedule Set
You can set the video recording method by Time and Motion Detection Triggered Recording.
SCHEDULE SET
│ │ │ │ │ │ │ │ │
03 6 9 12 15 18 21 24
PRESS (UP DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
“T” Time (System Default)
“M” Motion Detection Triggered
[
Up] and [ Down]: To move the cursor
[
SEL]: To modify record method
Numbers along middle indicate the 24
hours of a day
For example:
If you want to record by motion detection during 3am to 6am, please set the time points (3, 4, 5, 6) from to be “M”; if you want to continuously record during 7am to 12 noon, please set the time points (7, 8, 9, 10, 11, 12) to be “T”.
Both of the two recording methods need to be triggered by pressing [
REC] button. After pressing [
REC] button, if the schedule is set to be “T” at that time, DVR will start to record immediately; if the schedule is set to be “M”, DVR will not start record until motion is captured and detected by system.
Force Record：
When DVR is set to record by motion detection, DVR will not record if there is no motion. If you want to record immediately, please press [
REC] button and hold for 3 to 5 seconds, DVR will start force record.
- 8 -