QSD004 User’s Manual
5.15 Video Mode
Select NTSC or PAL video source.
5.16 Factory Reset
Press [SEL] button to reload factory defaults, then the DVR will reboot, all custom settings (including password) will be restore to factory default.
Caution: There is no confirming dialog box for this selection after you
press [SEL] button, please be patient!
If you forget your password, please keep the system on main screen, and then press [Pause] button ten (10) times, the DVR will reset the system. Then the default password will be: [CH1] button six (6) times.
If the DVR is recording, please unplug the power supply and uninstall the HDD, then connect power to boot DVR and press [Pause] button for ten (10) times.
Chapter 6: Recording
6.1 Start Recording
Press [REC] to start recording (as set in 5.7 Schedule Set).
DVR will display system information on screen.
10% 1
2
R
R
3
12
3 4
R
R
4 | 5 | 6 | 7 | 8 |
EACH REC [M] (T) 2008/07/01 16:22:30
- 12 -