Insert the Batteries, Position the Receiver

WMC Remote Control and Receiver RRC-127		User Manual

Welcome

Congratulations on your purchase of the Remote Control and Receiver for Windows Media Center. The infrared (IR) remote control and receiver let you access and manage your Media Center PC and other peripheral devices.

※Important:if your Media Center PC has receiver installed, skip the sections in this manual that describe working with the receiver

STEP 1 Insert the Batteries

The remote control uses two AAA batteries, which are included in the package. Whenever you insert batteries, always make sure both of them are new.

To insert the batteries

1.1Remove the battery compartment cover by pushing on its release and lifting up.

1.2Insert the batteries, making sure to properly orient the positive (+) and negative (－) ends as specified by the battery compartment labels.

1.3Replace the battery compartment cover.

STEP 2 Position the Receiver

For optimum performance, make sure that the distance between the remote control and the receiver doesn’t exceed 10 meters. Keep a direct, unobstructed line of sight between the receiver and the remote control, and don’t let any natural or artificial light shine directly on the receiver’s IR sensor. If you already have an IR receiver, and did not purchase the receiver, see “Using the Remote Control” later in this User Manual.