Connect the Receiver, Using the Remote Control

WMC Remote Control and Receiver RRC-127		User Manual

STEP 3 Connect the Receiver

The receiver relays input from your remote control to your computer.

To connect the receiver

y With your computer turned on, plug the rectangular universal serial bus (ISB) connector into your computer’s USB port.

USING THE REMOTE CONTROL

You use the remote control to interact with most of the features in Media Center. No software or setup procedure is required. Just point the remote control at the receiver, and then enter your commands.

Your remote control has five types of buttons:

yNavigation buttons, to move between items on the screen. (for example, up arrow or enter)

yPlayback buttons, to control your media (for example, pause or stop).

yAudio-visual (AV) and power buttons, to change channels and adjust volume. (for example, channel up or mute)

yShortcut buttons, to provide a quick way for users to access key media experiences in Windows Media Center.

yNumeric keypad buttons, to enter alphanumeric characters or TV channels.