System Connection for recording external digital signals (Front Panel)
When connecting external signals, be sure to switch off the power source of the unit and other devices
DVDRX160
DV AND USB INPUTS
Refer to the manual of your mini firewire or usb device for further instructions on how to connect
USB FLASH DRIVE
DV
IN/OUT
CAMCORDER WITH IEEE1394 OUTPUT
Recording Mode
Introduction
There are various external signal inputs in the unit, including
■
■Composite Video
■TV tuning
■DV input
■Stereo audio input
You can select any group of audio and video signals from these inputs for recording.
INSERTING A NEW DISC
Upon inserting a new disc, the unit needs to initialise the disc.
Please wait until this is finished to start recording!
Manual Recording
Recording Source
You can select which video input the unit should record from. The following options are available
■Tuner
■Front CVBS (Composite)
■Front
■DV Input
Press the SOURCE button (repeatedly) to change the video source and select one of the above.
Note: If you are recording from a rear source, make sure your audio connections are connected to the rear audio inputs. If you are recording from a front source, make sure your audio connections are connected to the front audio inputs.
15