LPFM1532
Cover Plate Installation
Mounting
Hardware
Slotted Opening
Cover
Plate
Securing
Screw
Mounting
Point
Flat Panel
Step 1. Secure the cover plate to the flat panel using four (4) Phillip screws (supplied).
Step 2. The slotted opening must be facing up and the flat surface touching the flat panel surface.
DO NOT OVERTIGHTEN THE MOUNTING SCREWS
Adapter Plate Installation (Optional)
The optional adapter plate can be used if the flat panel has 200mm x 200mm or 200mm x 100mm mounting points (please see Page 10).
Step 1. Line up the side holes on the adapter plate with the side holes on the cover plate.
Cover Plate
Mounting Hole
Mounting Hole
M6 x 8mm Phillips
Head Screws
Installation Instructions
Mounting
Hardware
Universal Spacer
Recessed VESA 75mm/100mm Pattern
Universal spacer stacking is limited to five (5) spacers max for
each mounting screw.
Step 1. If you have a recessed VESA 75mm/ 100mm pattern or need more spacing between the wall and the flat panel, use the appropriate number of universal spacers and corresponding length mounting hardware.
DO NOT OVERTIGHTEN THE
MOUNTING SCREWS
Page 7