32
ACER G24
6. Firmware Upgrade Process (continued)
Go to cover page
Press [Device] button to select the “ WP pin pull to high during ISP “
Press [Read] button.
1.Press Read folder to browse firmware image. 2.The position according to where the firmware be put
Press [Run] button and waiting for firmware upgrade
completed .The screen will show “PASS”
Check firmware version
Turn off the power,then press force on “ POWER ” and “ E ” button at the same time then press on “ MENU ”button to enter factory mode
Note: Please pay attention ,Don’t change any parameter which is measured by precise machine before shipping out
1
2
Press [Auto] button
When you writing F/W face on interrupting that cause monitor shut down .
You can unplug AC power then press “AUTO”button and plug AC power at the same time to solve this problem then