4. Assembly and Disassembly Procedures (continued)
ACER G24
17
|
|
|
| Go to cover page |
|
|
| Hold the one upside corner of the front bezel after | |
Put the dissembled monitor closed to by myself | S9 separating the upside of the front bezel | |||
S8 |
|
| Using properly force to pull up front bezel that will | |
|
|
| let the locking mechanism of left side, right side | |
|
|
| and down side separated | |
| RIGHT SIDE |
| ||
|
| DOWN |
|
|
UP |
|
|
| |
SIDE |
| SIDE |
|
|
|
|
|
| |
LEFT SIDE
Wedge your finger between the front bezel and the panel, then pry up on the front bezel to disengage the locking mechanism.
Hold one side of down side that had been separated from front bezel
Use properly force to pull up front bezel
S10
Insert steel rule between panel and front bezel
.Using properly force to let the locking mechanism of front bezel and rear cover separated
Separating all of the locking mechanism of the front bezel in turn
S11
Unhook the key function board from front bezel,
disconnect the key function cable