Installation Instructions | |
Cable Management | Extension and Swivel Tension |
CAUTION: Ensure that adequate cable slack exists for movement of display, and that cables will not be pinched by installation of covers (G) or screws (R).
1.Carefully insert cables into cavities located in lower portions of mount arms. (See Figure 12)
2.Install each cover (G) with two screws (R). (See Figure 12)
1 |
|
| (G) x 4 |
2 | (R) x 8 |
Figure 12
Adjustments
Pitch
1.Loosen pitch adjustment knob. (See Figure 13)
2.Tilt display to desired angle
3.Tighten pitch adjustment knob. (See Figure 13)
WARNING: Excessive loosening or tightening of adjustment screws can result in serious personal injury or damage to equipment!
1.Using hex keys (I, J), loosen or tighten adjustment screws as required to achieve desired tension. (See Figure 14)
1
1
9/16" (14.3mm)
2
1
0°
3
+15°
Figure 13
Figure 14
10