Acer AT3705-MGW, AT3705-DTV Connecting external audio/video devices, Source-IN

English

Connecting external audio/video devices

Connecting a DVD, VCR or audio/video equipment

Connect your DVD player, VCR or audio/video equipment using the SCART port located at the rear of your LCD TV as shown below.

Source-IN	**COMPONENT
	AUDIO
	G B R W R

**SCART

S	Y W R
S-VIDEO
***COMPOSITE	COMPONENT 1,2 in
AUDIO

*HDMI

DVD

AV-1 in
S Y W R	W R G B R

or

VCR

Y Yellow

R Red

W White

B Blue

G Green

S S-video

*If your audio/video device is HDMI-ready, it is recommended that you use the HDMI cable. The HDMI port is located under the back panel of your TV, as shown above.

**Acer recommends the following priority for connection types: HDMI -> Component -> SCART -> S-video -> Composite. (SCART4 and Co mponent2 for AT3705 models only.)

***Use the composite cable if your equipment does not have S-video-out.

AV-OUT

Y W R

		**COMPOSITE
		AUDIO
		*SPDIF
	Y W R		Yellow
		Y
Composite-in	Audio-in	SPDIF-in	Red
		R

W White

RecorderAV

*Acer recommends using the SPDIF connector to connect to your AV amplifier for 5.1 surround sound while watching digital TV programs, since your LCD TV supports Dolby digital sound. For details please see "audio effects" on page 32.

**Composite-out only works with analog broadcasts.

***If you need the TV speakers to be turned off when connecting an external AV device, please use the OSD to set "Internal speaker" to "off".

16

4.in.1.05.series.0303.indb 16

3/8/2006 2:03:45 PM