Acer AT3705-DTV, AT3705-MGW important safety instructions Advanced features, Pip/Pbp/Pop

Advanced features

PIP/PBP/POP

•Press the PIP/PBP/POP button once to display activate picture-in- picture (PIP).

•Press the PIP/PBP/POP button twice to activate picture-by-picture (PBP).

•Press the PIP/PBP/POP button three times to activate picture-on-

picture (POP). Then, the POP screens will display the TV channel programs one by one.

PIP	POP	POP	POP
	PBP		POP
			POP

PIP (Picture-in-Picture) PBP (Picture-by-Picture) POP (Picture-on-Picture)

1. For a list of the available sources for this feature, please refer to the appendix at the end of this manual.

2. The OSD menu is not available in PIP/POP/PBP modes.

			1a. Press the ACTIVE key to toggle between PIP screens.
1	2	3	1b. Press the TV, AV, SCART or PC keys, number keys or CH up or
4	5	6
7	8	9	down to change the content of the active screen.
	0

2.Press the SWAP key to change the content between the primary and the subscreen.

PIP	Swap	PIP
PIP

		3. Press the POSITION key to select the location of the
		subscreens, from lower right -> lower left -> upper left ->
PIP	PIP	upper right, as shown in the image.
PIP	PIP

	4. Press the SIZE/MODE key to select the size of the subscreen,
PIP	from 20% -> 30%, as shown in the image.

English

23

4.in.1.05.series.0303.indb 23

3/8/2006 2:03:49 PM