Customizing TV settings, Playing a Jpeg disc

Insignia NS-CL19C 19" Combo DVD/LCD TV

Using repeat play	• To completely stop disc playback, press
You can repeat tracks or the entire CD using		STOP twice.
You can repeat tracks or the entire CD using		STOP twice.
repeat play.	7 Press		OPEN/CLOSE to remove the disc.
To use repeat play:	Customizing TV settings
1 While the CD is playing, press REPEAT to	Customizing TV settings
scroll through the options:

•Single - (play current track)

•Repeat One - (repeat current track)

•Repeat Folder - (repeat current folder)

•Folder - (play current folder)

2To stop repeat playback, do one of the following:

•Press REPEAT until “Folder” disappears from the screen.

•Press STOP twice.

•Eject the CD.

Changing the audio mode

To change the audio output of a multi-channel CD:

•During CD playback, press AUDIO. The setting changes each time you press the button:

•Mono Left

•Mono Right

•Mix-Mono

•Stereo

Selecting a track for playback

To select a specific track for playback:

•After you load a CD into the player, and after the player finishes reading the disc, press the number buttons to enter the track number, then press PLAY/ENTER to play the track.

Tip

If the track number is under 10, press buttons 1-9to select it. If the track number is 10, press 10+ once, then button 0 to select it. If the track number is over 10, press 10+ once, then a button 1-9.

Playing a JPEG disc

To play a JPEG disc:

1Press POWER to turn on the player.

2 Press TV/DVD to select DVD.

3Press OPEN/CLOSE to open the disc tray.

4Place the disc in the disc tray, then press OPEN/CLOSE to close the disc tray. The disc navigation menu opens.

5 Press to select the file you want, then press PLAY/ENTER to confirm. The slideshow begins.

6During playback:

Opening and navigating the on-screen menus

Using the on-screen menu

Your TV has an on-screen menu that lets you adjust TV settings, such as video and audio settings.

To use the on-screen menu:

1Press MENU on the TV or remote control, then press VOL+/VOL- to display the menu you want.

2Press CH+/CH- to enter the menu and to highlight option you want, then press VOL+/ VOL- to change the setting.

3If a submenu is available, press VOL+ to enter the submenu, the press VOL+/VOL- to change the setting.

4Press MENU or EXIT to close the on-screen menu.

On-screen menus

	On-screen	Options
	menu	Options
	menu

	TUNING	CHANNEL–The current channel selected. Press
		VOL+/VOL- to change the setting.
		CHANNEL LABEL–Lets you add a label to a
		channel.
		CHANNEL LOCK–Lets you lock a channel.
		SKIP–Setting this to ON causes the current
		channel (see CHANNEL above) to be skipped
		on the channel list. You can select a skipped
		channel by inputting the channel number using
		the number keys.
		AFC–Auto frequency control. Select ON to
		automatically improve image quality.
		FINE TUNE–Use to manually adjust tuning to
		improve image and sound quality. Do not use
		unless reception is poor.
		ANTENNA–Selects the TV antenna source (AIR
		or CATV).
		AUTO PROGRAM–Automatically sets up a list
		of the channels available in your area for the
		antenna type selected. For more information,
		see “Programming channels into memory” on
		page 11.

•Press PAUSE/STEP on the remote, to stop the picture and press PLAY/ENTER resume normal play.

•Press PREV to skip to the previous

picture, and press NEXT to skip to the next picture. Press repeatedly to continue skipping back or forward.

Using repeat play