|
|
|
|
|
|
| Insignia |
Setting up your TV |
| ||||||
Note | |||||||
|
|
|
|
|
|
| Objects between the remote control and the |
Installing the remote control batteries | sensor may weaken the remote control’s IR signal. | ||||||
Range can be diminished by direct sunlight | |||||||
| To install the batteries: | shining on the TV’s IR sensor. | |||||
|
| ||||||
|
| ||||||
1Open the battery compartment on the back of
the remote control. | Cautions |
| Do not expose the remote control to liquids, direct |
| sunlight, or shock. |
| The remote control may not work correctly if the |
| TV’s IR sensor is under direct sunlight or strong |
| lighting. In these cases, change the angle of the |
| lighting or the TV screen, or operate the remote |
| control closer to the IR sensor. |
Connecting to video sources
Connecting to an antenna or cable/satellite receiver
3
1
2Insert the two AA batteries (provided) into the battery compartment. Make sure that the (+) and
Using the remote control
To use the remote control:
•Point it directly at the TV, within a 30° angle of the IR sensor on the front of the TV, and within 20 feet.
4
2
To connect an external antenna or cable/ satellite receiver:
1Connect the antenna cable (1) from an antenna (2) or cable/satellite receiver (3) to the antenna input jack (4) on the TV.
2Press the INPUT button to set the TV’s signal input to TV.
Notes
•To improve picture quality in a poor signal area, you can purchase and install a signal amplifier.
•To split the signal from an antenna, you will need a
8 |