Insignia NS-CL19C manual Troubleshooting, Changing DVD settings, Problem Solution

Insignia NS-CL19C 19" Combo DVD/LCD TV

Changing DVD settings

On-screen	Options
menu
GENERAL SETUP	TV DISPLAY–Sets the aspect ratio of the TV
	display.
	•	4:3/PS (Pan and Scan - may be used
		with external TVs) Widescreen images
		are shown on the screen, but with some
		parts automatically cut off the ends.
	•	4:3/LB (Letter Box - use with internal
		TV) Widescreen images are shown on
		the screen with black bars on the top
		and bottom of the screen.
	•	16:9 (may be used with external TVs)
		Widescreen images fill the entire
		screen.
	ANGLE MARK–Lets you turn the Angle option
	On or Off. If you set this to On, you can use the
	ANGLE button on the remote to select an
	alternate viewing angle on the DVD.
	OSD Lang.–Lets you select the language for
	the On Screen Display (OSD).
	CAPTION–Lets you turn the caption On or Off.
	SCREEN SAVER–Lets you turn on the screen
	saver, which displays when the DVD player is
	idle for more than three minutes.
	Hdcd–Lets you set Hdcd to "OFF","1X","2X" to
	switch the CD play mode between "Normal
	CD","HDCD with 44.1K","HDCD with 88.2K". You
	can play normal CDs when "HDCD" is set to off.
	You can play 44.1K CDs when HDCD is set to
	1X, and 88.2K CDs when HDCD is set to 2X to
	enhance the audio quality.
	Last Memory–Lets you turn the last memory
	option On or Off. When set to On, the DVD
	player remembers the chapter that you were
	viewing when you turn the DVD player off and
	starts the DVD at that chapter when you turn
	the DVD player back on.
PREFERENCE	TV Type–Lets you select the TV output.
(only available	Choices include:
when no disc is in	•	NTSC (default)–Standard for America.
the player)	•	AUTO–Automatically changes based on
		the DVD in the player.
	•	PAL–Standard for Europe.
	PARENTAL–Lets you set Parental Controls for
	watching DVDs. Initial password is 1234
	Options include:
	•	Off
	•	1 Kid Safe
	•	2 G
	•	3 Pg
	•	4 Pg 13
	•	5 Pgr
	•	6 R
	•	7 Nc 17
	•	8 Adult
	PASSWORD CHANGE–Lets you change the
	password used to set or change Parental
	Controls. The initial password is 1234. Use the
	number buttons to enter, then confirm the new
	password.
	Note: If you forget your password, enter 1369.
	DEFAULT–Resets all settings (except Parental
	Controls and the password) to factory default.
	Press ENTER to confirm.

Troubleshooting

Please check the following items before asking for repair service:

Problem	Solution
No picture or	Check all cable connections.
sound.	Make sure that the TV is plugged in and turned
	on.
	Make sure that electricity is available at the AC
	power outlet.
Picture is OK, but	Check the volume level and mute settings.
no sound.	Switch to another channel to determine if the
	station is the problem.
No picture	Make sure that the TV is working properly.
	Press the INPUT button to select TV input.
	Make sure the color system is set correctly.
Sound is OK, but no	Check the color control and adjust it.
color.	Check the program’s color features, because it
	may be a black and white movie.
The picture has	Make sure that the antenna is installed
overlapped images.	correctly. If not, adjust the antenna toward the
	broadcasting station.
Picture has “snow.”	Check the antenna and its connection. If there
	are problems, correct them. If all connections
	are tight, the problem may be with a faulty
	antenna or cable.
	Check whether car traffic or neon signs
	disturb the image.
Stripes on picture.	Check for interference from other electronic
	devices, such as radios and televisions, and
	keep magnetic or electronic devices away
	from the TV.
Bad stereo or SAP	Long distance from the station or interfering
sound.	radio waves can result in bad sound reception.
	If so, change the mode to Mono.
Remote control	Point the remote control at the TV’s IR sensor.
does not work.	Change the batteries in the remote control.
	Remove any obstacles between the TV’s IR
	sensor and the remote control.
Image is not clear.	Adjust the NOISE REDUCTION function.
Image is not	Adjust the Horizontal or Vertical control.
centered.
Bad sound quality	Make sure that the audio output mode is set
	correctly.
	Make sure that the audio connection between
	the unit and amplifier (if used) is secure.
Disc cannot be	Make sure the disc is inserted with the label
played	facing forward.
	Clean the disc.
	Moisture has condensed in the player.
	Remove the disc and leave the player on for
	about an hour.
The player doesn’t	Disconnect the power plug for ten seconds,
operate normally	then reconnect it.
	If the problem persists, contact Insignia or
	your dealer for help.

www.insignia-products.com 17