Insignia IS-TV040922 To skip unwanted channel, To restore a skipped channel, Manual Fine Tuning

Tuning in

To skip unwanted channel

TV/AV

			STEREO
1	2	3	Direct channel
			select buttons
4	5	6	CCD
			DSP
7	8	9	DSP
			MUTE
0
SCAN			P

After presetting the channels, you can skip unwanted channels so that only the channels you want to watch are selected with Channel up/down buttons.

1 Select the unwanted channel with channel select buttons.

O r p r e s s M E N U b u t t o n		Search
repeatedly to display Search
menu, press CH- or CH+ to	Signal Input	Air
select Channel menu item,	Channel	28
press V- or V+ to select the	Skip	On
unwanted channel.	Auto Search	Press V+
Press CH- or CH+ to select Skip,	Fine tune	0
2 press V- or V+ to select Skip ON.

Thus, after exiting the menu, the channel will then be skipped when you select programs with the Channel up/down button.

If you want to skip other unwanted channels, repeat steps above to change the channel number.

Note: you can select the skipped channel by pressing the direct channel select buttons.

	CH+
V-	MENU	V+	Menu control buttons
	CH-

To restore a skipped channel

Use direct channel select buttons (0-9) to select the channel you want to restore. Enter into Search menu, press CH- or CH+ to select Skip, press V- or V+ to select Skip Off.

Manual Fine Tuning

*To exit the menu, press DSP button or repeatedly press MENU button.

Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning.

1 Select the channel you want to fine-tune.

2	Enter into Search menu, press		Search
		Signal Input	Air
	CH- or CH+ to select Fine Tune,
	then press and hold V- or V+, the	Channel	28
		Skip	Off
	channel begins fine tuning until
		Auto Search	Press V+
	the best possible picture and	Fine tune	-5
	sound is achieved.

(Press V- to fine-tune downward, while V+ to fine-tune upward. The AFT function will be set to OFF mode automatically)

Auto Fine Tuning (AFT)

If picture and sound's effect of the channel is instead poor by making use of Fine Tune, you can correct them by making use of AFT.

Search

1

2

Enter into Search menu, press CH- to select AFT.

Press V- or V+ to select AFT On.

Channel	28
Skip	Off
Auto Search	Press V+
Fine tune	-5
AFT	On

13