Insignia NS-LCD26F/NS-LCD32F/NS-CL26C LCD TV
Troubleshooting
Please check the following items before calling for service:
Problem | Solution |
|
|
No picture or | Check all cable connections. |
sound. | Make sure that the TV is plugged in and turned |
| on. |
| Make sure that electricity is available at the AC |
| power outlet. |
|
|
Picture is OK, but | Check the volume level and mute settings. |
no sound. | Switch to another channel to determine if the |
| station is the problem. |
|
|
No picture | Make sure that the TV is working properly. |
| Press the INPUT button to select TV input. |
| Make sure the color system is set correctly. |
|
|
Sound is OK, but no | Check the color control and adjust it. |
color. | Check the program’s color features, because it |
| may be a black and white movie. |
|
|
The picture has | Make sure that the antenna is installed |
overlapped images. | correctly. If not, adjust the antenna toward the |
| broadcasting station. |
|
|
Picture has “snow.” | Check the antenna and its connection. If there |
| are problems, correct them. If all connections |
| are tight, the problem may be with a faulty |
| antenna or cable. |
| Check whether car traffic or neon signs |
| disturb the image. |
|
|
Stripes on picture. | Check for interference from other electronic |
| devices, such as radios and televisions, and |
| keep magnetic or electronic devices away |
| from the TV. |
|
|
Remote control | Change the batteries in the remote control. |
does not work. | Remove any obstacles between the TV’s IR |
| sensor and the remote control. |
|
|
Image is not clear. | In VGA mode, adjust the PHASE control. |
|
|
Image is not | Adjust the Horizontal or Vertical control. |
centered. |
|
|
|
Bad sound quality | Make sure that the audio output mode is set |
| correctly. |
| Make sure that the audio connection between |
| the unit and amplifier (if used) is secure. |
|
|
The TV doesn’t | Disconnect the power plug for ten seconds, |
operate normally | then reconnect it. |
| If the problem persists, contact Insignia or |
| your dealer for help. |
Notes
•If the problem is not fixed after you check the above items, do not attempt to remove the back cover by yourself.
•You may hear a snapping sound from the TV occasionally. This is normal and is caused by temperature changes in the operating environment and does not affect the operation of the TV.
•Do not let the TV remain on static images for long periods of time because it can result in permanent residual images on the screen. If this situation occurs, the TV may recover automatically after 12 hours if you change to dynamic programming.
Maintaining
Handling and cleaning the TV
Shipping the TV
Please save the original shipping carton and packing materials. If you need to ship the TV, for maximum protection,
Keeping the exterior surfaces clean
•Do not use volatile liquids such as insecticide spray near the TV.
•Do not leave rubber or plastic products in contact with the TV for a long period of time because they can leave marks on the surface.
Cleaning the case
•To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.
•Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the player.
Maintaining the TV
This TV is a
Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use.
For details, please contact your nearest authorized service center.
Care and handling of discs
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
17 |