I-Tech Company WBX-6200F-V Parallel Port Mode, Epp, Ecp, EPP Version, Parallel Port DMA Channel

Page 42

Disabled Æ on-board parallel port function is ineffective and N/A

378h Æ locate IRQ7 for this default I/O address

278h Æ assign this I/O address to LPT1 3BCh Æ assign this I/O address to LPT1

Parallel Port Mode:

This option specifies the parallel port mode. ECP and EPP are both bi-directional data transfer schemes that adhere to the IEEE P1284 specifications. This Parallel Port Mode includes four options “Normal”, “Bi-Dir”, “EPP”, and “ECP”.

 

Setting

Description

Normal

Uni-direction operation at normal speed

 

Bi-Dir

Bi-direction operation at normal speed

 

 

The parallel port can be used with devices that adhere to

 

EPP

the Enhanced Parallel Port (EPP) specification. EPP uses

 

the existing parallel port signals to provide asymmetric

 

 

 

 

bi-directional data transfer driven by the host device.

 

 

The parallel port can be used with devices that adhere to

 

 

the Extended Capabilities Port (ECP) specification. ECP

 

ECP

uses the DMA protocol to achieve data transfer rates up to

 

 

2.5 Megabits per second. ECP provides symmetric

 

 

bi-directional communication.

EPP Version :

This option is only valid if the Parallel Port Mode option is set to EPP. This option specifies the version of the Enhanced Parallel Port specification that will be used by AMIBIOS.

Parallel Port DMA Channel :

This option is only available if On Board Parallel Port is set to fixed I/O address and the setting of Parallel Port Mode is ECP. This option sets the DMA channel used by ECP-capable parallel port.

33

Image 42
Contents WBX-6200F-V Copyright Notice Technology CorpSafety Precautions Page Acknowledgments (This page does not contain any information) Table of Contents Appendix B. System Assembly Reference How to Use This Manual Features Introduction„ Bios System Specification Parts SpecificationsCPU System View CF interface Pcmcia interfaceConnectors Unpacking Setting Up the System Getting StartedMethod 2 Use the COM or Parallel Port Installing System SoftwareMethod 1 Use the Ethernet Method 3 Use a External CD-ROMInstalling the Drivers Bios Setup Information Entering SetupKeys to navigate within setup menu Functions Standard Cmos Setup Menu Main Menu„ Menu selections Options Description Advanced Cmos Setup Bios Setup Items Failsafe Other Options DefaultPage Other Options Items Default Advanced Chipset SetupBios Setup Sdram CAS#Other Default Options IRQ14 IRQ11IRQ13 IRQ15CRT LCD CRT+LCD CRT+TV DVI DVI+CRT PCI / Plug and Play SetupBios Setup Optimal Failsafe Other Items Default Options Ntsc PAL, PalmPeripheral Setup Defaults Failsafe Other Default OptionsEPP, EPP+ECP Quick Boot Advanced Cmos Setup MenuHardware Monitor Setup Defaults 1st Boot Device / 2nd Boot Device / 3rd Boot DeviceUSB FDD, USB CDROM, USB HDD, USB RMD-FDD, USB RMD-HDD Try Other Boot DeviceBoot Up Num-Lock A.R.T for Hard DisksSystem Keyboard Password CheckBoot To OS/2 Primary DisplayConfigure Sdram Timing by SPD Advanced Chipset Setup MenuSystem Bios Cacheable L2 CacheSdram CAS# Latency Sdram Command RateSdram Frequency Sdram Bank InterleaveUSB Controller HDD Udma Mode ControlWDT Timer Control USB Device Legacy SupportPower Management Setup Menu Throttle Slow Clock Ratio Standby Time out MinuteSuspend Time out Minute Display ActivityResume On RTC Alarm Power Button FunctionRestore On AC/Power Loss RTC Alarm Date / Hour/ Minute / SecondPCI/Plug and Play Setup Plug and Play Aware O/SClear Nvram Peripheral Setup FIR DMA1 Select On Board FIR PortFIR IRQ Select On Board Parallel PortECP Parallel Port ModeEPP EPP VersionHardware Monitor Setup Bios Post Check Point List Code DescriptionInitializing the DMA controller, performing the keyboard BAT command to the keyboard controller Uncompressed Initialization Codes The following runtimePost Soft reset next Bios Post Flash Bios Utility Coprocessor testPage Appendix A. Jumper Setting Connectors List of CPU Board Jumpers Location and listJumper List Jumper SettingTable Jumper Setting Example Notation Description IllustrationLCD Panel Power select JP4 RTC Cmos Clear Jumper Setting JP1Touch Screen configuration JP2 DVI Port configuration JP5Connector Definitions Connectors LocationPage Connectors List COM1CN3 KB/MS CN1CN2 MINI-DINGpio Connector J2 Pin head on MB PIN No Signal Description HDD Power Connector Reset Button J1Signal Description Internal VGA Connector J3-optional PIN No Name DescriptionInverter power connector J7 PIN No Name Description Touch Pad Interface J8 PIN No Signal DescriptionPIN No Name Description CLK RST# INTB# INTA#3VAUX REQ# GNT#PIN No Signal Description CPU Fan Connector J10PCI Slot J11 PIN No Signal Description INTR#A INTR#B INTR#C RESET#INTR#D REQ#3Power Bottom J12 PIN No Name Description Power & HDD LED J13 PIN No Name DescriptionSystem Fan Connector J18 PIN No Name LED State Power HDD Active S1, S3 Off GreenVGA connector J15 PIN No Name Description RedPCIRST# DVI Port J21 PIN No Signal DescriptionAMP OUTR+ AMP OUTL+ AMP Outr AMP Outl Dvihsync Dvivsync Dviclk Tvclkr Dvidet SPCLK2 SPD2Power Jack Connector CN1 PIN No Name Description Internal USB Port J24 PIN No NameAudio Jack Line-out, Line-in, Micro CN2 485 PIN No Signal Description COM2 Pin Definition CN4 RS-232 PIN No Signal Description422 PIN No Signal Description KB/MS 6 pin MINI-DIN female CN3 PIN No Name DescriptionUSB a Port 0/1 CN8 PIN No Name Description RS-232 PIN No Signal DescriptionUSB a Port 2/3 CN7 PIN No Name Description TTL Interface pin assignment CN10LVDS1 Panel Connector CN11/CN12 PIN No Signal Description CN 12 for Lvds second Channel PIN No. Signal DescriptionCkin CKIN+ Primary IDE Connector IDE1 PIN No Signal Description Secondary IDE Connector IDE2 PIN No Signal Description TX+ RJ45 LAN connector LAN1 PIN No Name DescriptionInternal LPT Port LPT PIN No Signal Description RX+HDD Power Connector PJ1 PIN No Name VCC GNDCF interface LEDGpio Bracket Pcmcia / CPU Bottom Bracket CPU-A

WBX-6200F-V specifications

The I-Tech Company has made a significant impact in the technological landscape with its innovative product, the WBX-6200F-V. This advanced device is designed for various applications, including industrial automation, telecommunications, and smart infrastructure, setting a new standard for performance and reliability.

At its core, the WBX-6200F-V showcases a powerful processing unit that leverages multi-core architecture to enhance computational efficiency. This feature allows for multitasking capabilities, enabling it to handle demanding applications seamlessly. The cutting-edge processing technology ensures that the device operates smoothly under various loads, making it ideal for both real-time and batch processing tasks.

One of the standout characteristics of the WBX-6200F-V is its robust connectivity options. It supports multiple communication protocols, including Ethernet, Wi-Fi, and Bluetooth, which facilitate seamless integration into existing networks and systems. This flexibility enables users to deploy the device in diverse environments, making it a versatile solution for IoT (Internet of Things) applications.

In addition to connectivity, the WBX-6200F-V excels in data processing capabilities. With built-in cloud compatibility, users can easily store and analyze data remotely. This feature is crucial for industries that rely on big data analytics and require real-time insights for decision-making. The integration with cloud services allows for efficient data management and enhances collaboration between teams, regardless of their geographical locations.

Furthermore, the WBX-6200F-V is equipped with state-of-the-art security features to protect sensitive information. It incorporates advanced encryption protocols and secure access controls, ensuring that data transmitted over networks remains safe from unauthorized access and potential cyber threats. This focus on security is particularly important in industries that handle confidential information.

Moreover, the device is designed to be energy-efficient, featuring low power consumption without sacrificing performance. This characteristic not only reduces operational costs but also aligns with global sustainability initiatives.

The I-Tech Company WBX-6200F-V stands out for its user-friendly interface, making it accessible for a wide range of users. The intuitive design simplifies the setup process and provides easy access to various features, enabling businesses to leverage its capabilities effectively.

In conclusion, the I-Tech WBX-6200F-V combines exceptional processing power, versatile connectivity, robust security, and energy efficiency, making it a top choice for industries seeking reliable technological solutions. Its commitment to innovation positions I-Tech as a leader in the market, paving the way for future advancements in technology.